First you need to determine what the printer ID will be. If there is not one currently available, please contact the CU*Answers Systems Department and follow the procedure in order to create one.
The next steps are as follows:
- Click Start > Programs > IBM AS400 Client Access > Emulator > Start or Configure session
- Choose Configure
- The System Name should be wescprod.cubase.org
- Specify Workstation ID should be the printer ID assigned
- Check the box for "Transform print data..."
- The printer model should be *HP4000
- Drawer 1 should be set to Letter
- Drawer 2 should be set to Letter
- Make sure the the box next to "Printer supports ASCII..." is unchecked.
- Click OK and then OK again and if you are prompted for a type of sign on, choose Prompt every time and click OK.
- Sign on to the print session to verify it is working.
- After being signed on, click File > Printer Setup and make sure the correct printer is highlighted, then click OK.
- Click File > Save As and save the printer as the print session followed by pressing Enter 3 times.