​ For General Support and CBX Assistance: Use the AnswerBook to submit a question to the Client Services team. You can access the AnswerBook via a CBX session by selecting the @ symbol and asking a question, or by logging in and asking a question. You can also call 616-285-5711 or 800-327-3478 and follow the menu prompts to reach a representative. For Technical Support: Use the ConnectWise ticketing system to submit a question to the Network Services team. ConnectWise Client Portal Login Or  More...

There are several configurations that control the member’s ability to set up and maintain Automated Funds Transfer (AFTs) online. Does your credit union's Personal Internet Branch configuration allow the maintenance of AFTs? Are AFTs configured to show in online banking? Does the member's PIB configuration allow maintenance of AFTs in online banking? For existing AFTs: Is the record locked to prevent changes in online banking? 1. Does your credit union's Personal Internet Bran  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

Workflow Controls do not include an automatic flow to the teller posting system. However, there is an easy way to incorporate this into your procedures. First, set your Workflow Control configuration (Tool #1004 Workflow Controls: Open Mbrships/Accts ) so that the Open sub-accounts feature is turned off . When opening a new member, start from the first Teller Posting screen, using F21-Open from the first teller screen and processing the new membership until done. Using Cancel (F7) at that   More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

Yes, by making use of both a Misc. Receipts and a Misc. Expense posting code, so that you can put the funds temporarily into a G/L then issue a check from that same G/L. Here are the key steps: First, configure two posting codes, using Tool # 534 Misc. Posting Codes Configuration. For the first one, choose the Receipts type and set up a code that will allow you to place funds into a G/L account. For the second one, choose the Expenses/Advances type and set up a code that will allow you to  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

The NSF Statistics Dashboard (Tool #557) will track this information for you automatically. It is separated into the NSF category and the Courtesy Pay Category. Credit unions are using this dashboard to help predict averages of NSF/Courtesy Pay fee income and also to track how many members may be using the service. You can click on any of the origins (listed in blue text) and you can drill further to members who had more than X transactions in a specific month. There are a lot of graphical oppor  More...

Trust accounts can be set up as either individual or organizational depending on the legal nature of the trust. Following are recommendations for handling situations when a member wants to set up a membership where the primary member and the first joint owner are, in essence, the same person. This happens most often for trust accounts. Currently in CU*BASE there are two ways to handle trusts: For trusts that use a person’s SSN (where you do not have a separate TIN for the trust), set up th  More...

The FRB produces six sets of files each business day on weekdays, Monday through Friday, except for Federal Holidays. CU*Answers posts the files as follows: CU*Answers receives the first and sixth set of files overnight and posts them by 8:30 AM ET. As this posting is a combined posting, two Receive reports and one Posting report are produced. CU*Answers receives the second set of files by noon and posts by 1:00 PM ET. Same-day credits must be posted with this file. CU*Answers receives the thir  More...

When you use the filter buttons on the File Maintenance Inquiry dashboard (Tool #159: Audit File Maintenance Inquiry (CUFMNT)), indicators note which programs, fields/columns, and files/tables AuditLink has flagged as “critical” for auditing teams to monitor on a daily basis. You can quickly sort by that indicator and select only those items for a quick scan of maintenance that directly affects member accounts. Below is a listing of these critical items. Columns/Fields Field Why   More...

There are two methods used to track delinquent loans for reporting purposes in CBX: Method One (for Collections tracking) We have always tracked delinquency in two separate fields for “Months” and ‘Days” in the member files. When a loan is 30 days delinquent, it shows as “0 Months, 30 Days” delinquent. When a loan is 31 days delinquent, it is “1 Month, 0 Days” delinquent. A month is always considered 30 days regardless of the actual number of da  More...

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CBX in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 10, you’ll need to install Telnet. Visit https://social.technet.microsoft.com/wiki/contents/a  More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau . If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following types  More...

With the 16.10 release we have developed a new cross-reference system that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” Refer to the linked to Answer Book items for more information about this feature. At implementation of the release two reports were placed in your credit union’s HOLDxx OUTQ. The first, CNV40003, lists all  More...

In this particular member's situation there was no activity in either October or November that triggered a statement. The credit union's quarterly (and year-end) statements are configured to produce a statement for every member, regardless of activity level, but monthly statements are more restrictive in an attempt to save postage costs, and not every member gets a statement every month. NOTE: CBX statements have a considerable number of configuration options that allow credit unions t  More...

If you need to allow an employee to perform upload and/or download tasks (FinCEN, AIRES, ALM, uploading G/L entries to post, etc.), you must first complete the iShield Security Access Request form(s) and have it signed by your credit union’s designated Security Officer. Once our Client Services team receives your signed form and verifies it, a request will be submitted to our System i administrators, and you will be notified when the new permissions have been granted. This process typicall  More...

Yes. You can pull a credit report for any service using the online credit bureau process. Using Tool #53 Process Member Applications, use action code CR to pull the report without creating a loan request and application. We can then create Member Services denial notices for debit cards, checking accounts, ATM cards, etc.

Your credit union should require that the member use a restrictive endorsement – ‘For mobile deposit to [your credit union name]’. It is also recommended that your member agreements shift liability for a second presentment of an item to the depositor if the depositor fails to use the required language. Also, check with your RDC Process Vendor; eDOC Innovations, for example, offers a service that will scan for restrictive endorsements on all RDC items on submission.

There are several ways to obtain this data. To see the total number of active online banking members, use Tool #856 Tiered Svcs Monthly Comparison to display active user counts for any monthly period. (HINT: Click the Goal 4 button to display this data.) This can be done even if your credit union does not use Tiered Services for any other purpose. To print a report of usage statistics, use Tool #141 ARU/Online Banking Stats Dashboard To see online banking usage stats for a particular m  More...

No, you do not have to automatically activate OLB or ARU for new memberships. Actually, you can default all new memberships to deactivate online banking and/or audio response access until the member specifically requests it. This is highly recommended as it helps to protect members who join the credit union but never get around to using your online tools right away. These accounts may be your most vulnerable since the member hasn't set up a private password or security questions. By deact  More...

The Social Security Administration uses several company IDs for its ACH transactions. Previously two recommendations were made to handle the changing Company IDs, namely to create records for all possible Company IDs with duplicate distribution records or to transfer the distributions with the Automated Funds Transfers (AFT) system. With the 16.10 release a process was implemented that will no longer require either of these complicated solutions. Going forward only one Company ID will need to   More...

For CU*Answers online clients, effective in March 2017 the standard online retention is 12 months for basic savings and checking accounts, and 48 months for all certificates, IRAs (shares and CDs), HSA share and checking accounts, club accounts (such as vacation, holiday, Christmas), tax escrows, and all loans. Prior to March 2017, data retention was 6 months for savings/checking, and 24 months for other member transaction history . Note that when this data is purged, it also removes the additio  More...

No. This law actually pertains to merchant card programs where the merchant is collecting payments for services and goods sold. Since we do not run merchant programs on our platform, this reporting requirement does not apply to us.

GUAPPLE is short for GOLD Update Appliance. The GUAPPLE is a stand-alone network appliance that takes the place of the GOLD-Master update server PC. It is designed to seamlessly handle all of your GOLD software update retrieval tasks. No effort is required to retrieve software updates when using a GUAPPLE device. It will acquire GOLD update files automatically as well as custom loan screen updates, doing away with manually downloading and extracting software update files. One GUAPPLE unit  More...