Yes. There is an Amortization Default option available in each of your Loan Product Code configurations which allows credit unions to default amortization criteria such as: Delinquency Fine Code, Rate, Payment Frequency, # of Payments etc. The system will then default this value into the applicable fields when creating a new loan request. These defaults are intended to provide consistency for all new loan requests, but can be changed/edited during the loan request process if necessary.

There are two primary reasons we charge this fee: Our belief that we should do our best to keep our fees down when credit unions do not earn. This is why, for example, It's Me 247 mobile web is offered free to our credit unions. It's also behind our constant pressure to reduce fees where CUs have no basis or belief they can charge for a defensive, relationship service. Charging for these services in this manner fund other areas where the direct expenses cannot easily be identified wi  More...

IMPORTANT NOTE: When It’s Me 247 was updated in 2021, the “See” option shown on here was made unavailable. There are two major points to consider when thinking about allowing members to see information beyond the account to which they are actually logged in. Both extend beyond online banking to consider a financial institution’s role and responsibility in protecting member private data via all access channels, from the teller line to a back office employee answering   More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

If you pull credit reports using the CU*BASE online credit bureau access system, credit report data is stored online and can therefore be mined for opportunities. There are a couple of ways you can find this information: Use Tool #976 Where Your Members Borrow This tool pulls trade line data from stored credit report files, showing other financial institutions with whom your members do business. This tool lets you make a direct comparison between your credit union and a competitive FI. F  More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau . If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following types  More...

The tables to use for your custom data (this is also called Unique Data Management or UDM) are as follows: For membership-level custom fields: CMSCFDTA For account-level custom fields: CMBCFDTA

Note: this procedure also works with Carswell printers. (1) Turn the printer off. (2) Hold the FEED button while turning the printer back on. (3) Continue to hold the FEED button until the error light starts flashing. (4) Clear the paper by pressing the FEED button. If successful, a receipt printer settings page will print. Your printer's memory is now cleared. If this is not successful, please contact the Network Services Help Desk for assistance.

While it is possible that an issue someone runs into on a website is an issue with the web server or a programming issue with the site, it is very important to rule out any browser or workstation incompatibilities first. If the website is not being opened in a supported browser, for instance, it can cause errors that would otherwise not exist. So what are some standard troubleshooting steps than can be taken? Are you using the latest version of your browser? Just like any other piece of software  More...

The NSF Statistics Dashboard (Tool #557) will track this information for you automatically. It is separated into the NSF category and the Courtesy Pay Category. Credit unions are using this dashboard to help predict averages of NSF/Courtesy Pay fee income and also to track how many members may be using the service. You can click on any of the origins (listed in blue text) and you can drill further to members who had more than X transactions in a specific month. There are a lot of graphical oppor  More...

Make sure that drivers for the printer are loaded on the PC on which you are building the session. Test the drivers by printing a windows test page unless you are using a thermal receipt printer. DO NOT SEND WINDOWS TEST PAGES TO THERMAL RECEIPT PRINTERS! Once you know the printer is set up correctly, then perform the following steps: 1) Go to Start>Programs>IBM Client Access Express>Emulator>Start or Configure Session. 2) Select Configure. 3) Set the System Name to WESCPROD.  More...

The previous tools used for uploading and downloading to and from CU*BASE will be retired when your credit union recieves the 20.07 CU*BASE software release. For online and Site-Four credit unions, that date is Sunday, July 12. Self-processing credit unions will receive the release the following Sunday, July 19. To replace the two tools, a new tool was introduced in November 2018, Tool #1375 Data Transfers (Upload or Download) . Following the release, this tool will be the default data transfer  More...

Credit union FROM email addresses are closely regulated and monitored within CU*BASE. As a mass email sender, and as an entity that sends on behalf of the network of credit unions, CU*Answers must meet standards of compliance set forth by email service providers, such as Google and Yahoo. Many of these standards rely on our email being delivered to appropriate and accurate member emails, from correctly configured credit union emails. If we fall out of compliance with these standards, we run the   More...

The following old special Comment codes are no longer valid now that your credit data is being reported using the Metro 2 format: BU BV BW BX BY CA CB Instead, use the Consumer Information Indicator field on the loan account to report bankruptcy. This can be changed using Tool #20 Update Account Information on the loan account (click the Credit Reporting Info button to display the the Credit Bureau Reporting Information screen). NOTE: You only need to report bankrtupcy once. If the bankrupt  More...

There are several ways to obtain this data. To see the total number of active online banking members, use Tool #856 Tiered Svcs Monthly Comparison to display active user counts for any monthly period. (HINT: Click the Goal 4 button to display this data.) This can be done even if your credit union does not use Tiered Services for any other purpose. To print a report of usage statistics, use Tool #141 ARU/Online Banking Stats Dashboard To see online banking usage stats for a particular m  More...

PIB provides a layered security approach to add additional authentication controls for Online Banking. PIB, which stands for Personal Internet Branch, is an independent application that provides multiple, configurable controls that govern how Online Banking behaves and what members can do with access to it. PIB allows your members to control access to their accounts with controls by feature, day of week, time of day, and even geographic location. It layers additional passwords and member aut  More...

Here are seven things to review if you are trying to research why a loan did not report to the credit bureau. Look to see if the loan is flagged not to report to the credit bureau: Access Tool #20 Update Account Information (shortcut: acct) for the account and click the Credit Reporting Info button. The Report to credit bureau flag must be checked. Look at the Credit Report History located in Loan Account Inquiry via the Delinquency window (F23 or click the lookup button next to the Deli  More...

If you need to allow an employee to perform upload and/or download tasks (FinCEN, AIRES, ALM, uploading G/L entries to post, etc.), you must first complete the iShield Security Access Request form and have it signed by your credit union’s designated Security Officer to sign. Once our Client Services team receives your signed form and verifies it, a request will be submitted to our System i administrators, and you will be notified when the new permissions have been granted. This process wi  More...

CU*BASE uses phone numbers that are stored in the MASTPH file when generating card activation information to send to vendors on initial card orders. The numbers in MASTPH are determined by the label/flag applied in Tool #3 Open/Maintain Memberships/Accounts or Tool #15 Update Membership Information as follows: Nighttime # - primary phone number sent to vendor and defaulting into the Card Activation field when ordering a card. Daytime # - secondary phone number sent to the vendor. Mobile –   More...

Beginning with the 17.10 CUBASE Release (October 22, 2017 for online clients), CU*Answers implemented the CUFMAINT table, which includes data from the CUFMNT table, as well as additional data not included in CUFMNT. CU*Answers recommends using the CUFMAINT table for all report building and query activity. If you currently have any Queries using the CUFMNT table, they will still work, as CUFMNT is now a View over the C UFMAINT table but without all of the additional information, so it will s  More...

No, you do not have to automatically activate OLB or ARU for new memberships. Actually, you can default all new memberships to deactivate online banking and/or audio response access until the member specifically requests it. This is highly recommended as it helps to protect members who join the credit union but never get around to using your online tools right away. These accounts may be your most vulnerable since the member hasn't set up a private password or security questions. By deact  More...

To update a signature line in CU*BASE, you’ll use the Tool #497 Member Connect Marketing Tools . (You will need a file name to move forward, so it can be helpful to have a test file created in your QUERYxx library for situations like this.) NOTE: For Member Reach clients, Xtend has previously created a file ‘MBRRTEST’ that will allow you to access the Message Maintenance screen. Select Online Banking and/or email message from the first window and then use Enter. On the Mem  More...

CU*BASE has a tool that displays application statistics in a handy dashboard format. Tool #472 Loan Queue Activity Tracking allows you to choose a date range and branch to filter the information, with additional filters such as Underwriter Code, Delivery Channel, Interviewer ID, Loan Category, Product Code, Dealer #, and Business Unit, if you wish. You can also use this dashboard to analyze the data you've selected in your filters, as well as export to a PDF or Excel format. This dashboard c  More...

The process can vary a bit according to the vendor, but here's a discussion about how it works for credit unions on the CO-OP network, as an example. In most cases, debit card authorizations create a Misc. Secured Shares record on the member's account to hold the funds. When the actual transaction comes in, this record is automatically deleted. (There are exceptions to this rule, such as gas purchases.) A little history: In the past, debit card authorizations would add a hold to an ind  More...