There is a credit union-level on/off flag where you can disable auto-security as an option for ALL of your employees. To access this, launch Tool #327 Employee Security and use the CU Options button. If auto-security is enabled, anyone can choose to activate it if they wish, either manually by clicking the button at the bottom of the home page, or via their Preferences. As a compromise, if you have some employees who share workstations and therefore need to be able to enter an ID as they acc  More...

One method is to use the the Begin +/- and End +/- fields (Toool #640 Print Financial Reports) to define a period for the report that is specific number of months before (-) or after (+) the Current Period Begin defined. Therefore with the Current Period Begin of January 2017, as shown in the screenshot below, the first column defined is reporting a period of January 2018 (plus 12 months from the Current Period Begin ) to December 2018 (plus 23 months from the Current Period Begin ). And the sec  More...

Launch tool # 990 Work with AP Vendors to print out envelopes addressed to your vendors, either one at a time or in a batch of consecutive vendor #s. Once in the tool you can page down until you find the last vendor number you have on record (jot this vendor # down). Then, highlight and use the select key to go into any vendor record. Here, you can use option F23-Print Envelope. This will take you to the Print AP Vendor Name / Address on Envelope screen, where you can enter a vendor # range fo  More...

The NSF Statistics Dashboard (Tool #557) will track this information for you automatically. It is separated into the NSF category and the Courtesy Pay Category. Credit unions are using this dashboard to help predict averages of NSF/Courtesy Pay fee income and also to track how many members may be using the service. You can click on any of the origins (listed in blue text) and you can drill further to members who had more than X transactions in a specific month. There are a lot of graphical oppor  More...

If you need to adjust the previous year total paid that will appear on a 1099-MISC form, launch tool # 990 Work with AP Vendors , select the vendor, then click the Update 1099 Misc for Prev Year button and update the amount that should be reported on form 1099-MISC. This must be done after January 1 but prior to the deadline set in your Year-End Processing Guide (typically within the first week of January) if you want the change to be included on the printed 1099-MISC form.

You can Query the PCALTCFG file for information on e-Alerts and e-Notices. This file will show you all members who have signed up for these items, including an column indicating whether the member signed up to receive the alert via email or text message. In the alert type field, the types codes are as follows: AC = ACH transaction AB = Account Balance LN = Loan Payment Due NP = e-Notice

No. The way that normal CU*BASE features work is to use the CU*BASE Workstation Configuration settings to determine a default printer for certain functions, or you can choose a printer directly when printing most CU*BASE reports. But since IBM Query is not a CU*BASE program but rather a generic program offered by IBM, it does not have any way of looking at CU*BASE configs for the info it would need to direct the print job. Therefore a Query definition will go to your list of spooled files and  More...

The freeze codes themselves are designed when you want to control the member's access to the funds in his or her account. But if you want to control whether an employee can access or post transactions on a particular membership, you should check into Employee Account Security and/or Employee Type Codes . These can stop a member from making a transaction at the teller line until the appropriate employee could give access to the account, but wouldn’t stop the member from using self  More...

Yes, there are requirements for code version and configuration settings you'll need. If you utilize CU*Answers Imaging Solutions for release management, you are are all set with your code versions; however, it will required configuration settings. Contact Imaging Solutions to leverage this feature. If you do not leverage Imaging Solutions release management, you will need to work with both your imaging solutions provider and CU*Answers Imaging Solutions.

That’s true when adding a brand-new record, but it is possible to re-sequence numbers later once the records already exist, so try this: Use Add and add the new contact number, leaving the sequence # as is After saving, select the new number in the list and use Edit Change the sequence # to 1 and press Enter A warning message will appear; use Add/Update to confirm All remaining phone numbers will be re-sequenced to fit the new one in. TIP: When changing the sequence number for an existin  More...

The hold days and account type fields are used to give CU*BASE instructions on how to place a hold. All CU*BASE does is create an Uncollected Funds record for that amount, for that # of days, on that particular sub-account . If you deposit the money into multiple accounts, the hold still gets placed on that one account, so just be aware of what that will do to the member's available balance on that account!

You will need to manually update the rate because the score that is automaically pulled into the loan calculation screen will belong to the primary member.

Workflow Controls do not include an automatic flow to the teller posting system. However, there is an easy way to incorporate this into your procedures. First, set your Workflow Control configuration (Tool #1004 Workflow Controls: Open Mbrships/Accts ) so that the Open sub-accounts feature is turned off . When opening a new member, start from the first Teller Posting screen, using F21-Open from the first teller screen and processing the new membership until done. Using Cancel (F7) at that   More...

Yes, by making use of both a Misc. Receipts and a Misc. Expense posting code, so that you can put the funds temporarily into a G/L then issue a check from that same G/L. Here are the key steps: First, configure two posting codes, using Tool # 534 Misc. Posting Codes Configuration. For the first one, choose the Receipts type and set up a code that will allow you to place funds into a G/L account. For the second one, choose the Expenses/Advances type and set up a code that will allow you to  More...

There are several configurations that control the member’s ability to set up and maintain Automated Funds Transfer (AFTs) online. Does your credit union's Personal Internet Branch configuration allow the maintenance of AFTs? Are AFTs configured to show in online banking? Does the member's PIB configuration allow maintenance of AFTs in online banking? For existing AFTs: Is the record locked to prevent changes in online banking? 1. Does your credit union's Personal Internet Bran  More...

Deactivating auto-security then reactivating it does require you to enter a different employee ID. After a password is entered to reactivate auto-security under that ID, the screen will refresh the tools display to show which ones can be accessed and which cannot. However, it doesn't necessarily refresh all of that employee's other preferences such as color theme or tool set (Favorites vs. All My Tools). Therefore it's best to just log off and have the next user log in to complete  More...

Yes. The procedure depends on whether they are using all or part of the money from the check: If just using part of the funds, after entering the outside check amount, you would enter a deposit amount for everything except the amount of the tickets, then enter Proc code R, then use F5-Post . The Miscellaneous Receipts screen will appear. (As an alternative, instead of using Proc Code R and F5, simply use F8-M/R to post and proceed to the Misc. Receipts screen.) If using the entire check to pa  More...

The Certify address flag can be unchecked (or checked) using Tool # 15 Update Membership Information.

You can use a third party tool to work your asset and liability projects and the associated income and expenses. Just remember that you can only upload the income and expense figures into your budget. The upload tool does not support uploading resulting balances for asset and liability G/Ls.

No, the field must be entered if you are calculating holds based on R T number. However, remember that the system will allow you override the number of days to place a hold, and you can even set that to 0 days if you want. (Whenever you enter something manually into the Days field, that always takes precedence over any calculated amount.) So you would enter the R T #, the check amount, 0 days , and the account type (you still need a valid suffix even though the won't really be adding a ho  More...

This has to do with the difference between the business date and activity date on a transaction that occurs around midnight, when the system might still be processing on today's business date but the clock has already moved past midnight to a different activity (system) date. For example, a member uses online banking after midnight on the 1st but we haven't yet done EOD for the 31st, then the last disbursed date on that loan account record will still be recorded as the 1st (the activity   More...

Yes, you can designate your credit union's own savings (or checking) account number to receive round-up funds when setting up a member's round-up transfers, if you wish. 1. Launch Tool #14 Member Personal Banker for a member who wants to participate 2. Select the Debit Card Roundup enrollment button and double click on the member's desired suffix 3. Enter in your credit union's internal account for the account to which you'd like the round-up funds transferred (this accou  More...

Technically, yes, but you will need to go through a similar process as you went through to move to vertical receipts in the first place, including scheduling an after-hours conversion with someone available at every branch to perform testing. Remember that all of your printers must use the same receipt format, so if you decide to switch back, ALL of your receipts at every branch will go back to the old format. NOTE: A date has not yet been determined, but it is likely that at some point down th  More...

If you: A) automatically deactivate online banking access for all new members, and B) expire online banking passwords due to non-use after 90 days, then how do you run an online banking promotion? After all, sending a marketing piece to members won't do any good if they're disabled or locked out from logging in. Of course you could have them call the credit union to get set up, but here's another idea: Set up a special promotional period! Pick a date to start your campaign. Advert  More...

This is an issue when trying to access the IBM iAccess Key Database that holds all the certificate information necessary for using SSL. Make sure you've run the updates.cubase.org for enabling encryption as well as the everyone permission to ensure all users can access the key database file. Next you will want to access the IBM iAccess for Windows either through Control Panel or the Start Menu and go under the Secure Sockets option. Select 'Use default key database' if not already se  More...