The process can vary a bit according to the vendor, but here's a discussion about how it works for credit unions on the CO-OP network, as an example. In most cases, debit card authorizations create a Misc. Secured Shares record on the member's account to hold the funds. When the actual transaction comes in, this record is automatically deleted. (There are exceptions to this rule, such as gas purchases.) A little history: In the past, debit card authorizations would add a hold to an ind  More...

No. This law actually pertains to merchant card programs where the merchant is collecting payments for services and goods sold. Since we do not run merchant programs on our platform, this reporting requirement does not apply to us.

When a credit union statuses a member's card as 'HOT' or warm (Lost/Stolen/Fraud/Restricted), this information is transmitted immediately to your vendor to stop any further withdrawals/purchases being performed with that particular card. But at your vendor a 'Hot Card' is not considered to be a closed card. When your member's card remains at a HOT or Warm card status on CU*BASE, CU*BASE is still required to send any maintenance updates such as address change, phone numbe  More...

The fields are related to Process Codes, in that they are derived from the code attached to the message received from the plastics processor (vendor, or switch). The Type you see in the initial Type column of the Activity screen relates directly to the Transaction Description when you view additional transaction details. Transaction types may not apply to all vendors. Examples of these labels are as follows: DEP (Deposit Transactions) ATM/DEP A deposit made at an ATM. ATM/DEP - including a $  More...

The reports associated with the Standard ATM/Debit process are as follows: LPANTX1 Detail Information for transactions (Card # order) LPANTX2 Summary Information for transactions (BIN order) - USED FOR BALANCING SETTLEMENT TOTALS LPANEX Exceptions report (Broken down into three sections: Denials, Unposted Items, and ISA Fees) LPANAC1 Detail Information for transactions (Account # order) LPANAC2 Summary Information for transactions (BIN order) PADLIM Report  More...

Yes. When reviewing the history on the account, you can select the additional transaction information for the transaction in question. This will take you to the Recorded Card Activity screen for this transaction. The top of the screen presents the last four digits of the card #, and right below that, the embossed names. If a husband and wife each have a card with the same PAN (card #), you can find the card sequence # in the top right corner of the Recorded Activity Screen. This will allow y  More...

There are three choices. 1. Manually add the estimated finance charges to the balance of the account and have the member make the full payoff at that time. Then clear the cumulative balance on the individual buckets to ensure that there are no finance charges assessed on the account. To do this you will launch Tool #20 Update Account Information. Select the credit card account and then select F16/Chg Type Maint. Select the individual bucket and select the Maintenance action code. In the cumulat  More...

Yes. You can pull a credit report for any service using the online credit bureau process. Using Tool #53 Process Member Applications, use action code CR to pull the report without creating a loan request and application. We can then create Member Services denial notices for debit cards, checking accounts, ATM cards, etc.

Message Types are utilized by CU*BASE to determine what action is to be taken for this transaction. The original message type is the incoming message received by CU*BASE from your vendor. Depending on the Message Type received by CU*BASE, the system could perform any of the following type of transactions (this is not an all inclusive listing): Balance Inquiry Request for Authorization of Transaction Advice of Authorization (Vendor/VISA/MC approved) Transfer of Funds Request Reversal of Transac  More...

T o order an online credit card for a co-applicant on the loan account, you would complete the following steps: Launch Tool #12 Update/Order Online Credit Cards Enter the member number and suffix for the Visa loan account OR If you have the last 4 digits of the primary member's Visa card number, you may enter that instead Use Enter to continue On the next screen you will see a card that has been ordered for your primary member only. On the lower left corner of the screen, choose Add   More...

The information you will want to write down or print when ordering cards at the vendor is the PAN number. Once you have the PAN from the vendor you will launch Tool #11 ATM/Debit Card Maintenance in CU*BASE. Once in this option, enter the member's account base. If the member has existing cards, use F6/Add Card. If they do not, simply select the correct BIN for the new card. In the Card/PIN Order screen you will notice that the Card # at the top of the screen is view only. To unlock thi  More...

In many cases, the reason an opted-out member receives the non-return fee is because this transaction is a recurring payment. Recurring transactions are not covered by the Reg. E Opt In/Out requirements. You can identify this by the * after the DBT/WDR trans description on the member's transaction history. Recurring transactions are posted and fee'd even if the member is Opted Out.

In some cases, the general upload file that is received by CU*Answers on a daily basis only contains accounts where a member has had a change to their account. Contact your OTB vendor to see if you can request a full file to be sent so that all card information would be sent in the upload file to CU*Answers. (In some cases if your CU is already being charged for the upload it is possible there would be no change in price to have the full file sent over.)

Changing the member's name via Tool #15 Update Membership Information does not automatically change the member's name in the PLASTICS file. You would need to access Tool #11 ATM Debit Card Maintenance , highlight the member's card, and select Reorder Card/PIN. You will then be able to change the member's name and order them a debit card with the correct name information. Before selecting Add/Update, make sure you only select Order Card, and deselect the Order PIN and   More...

The Member Service Denials feature (to create/print denial notices) can be accessed via a Denied button located within Tool #3 Open/Maintain Memberships/Accounts. A credit union can configure miscellaneous member service denial notice types such as: ATM/Debit Card application denials, checking account denials, membership application denials, etc. These member service denials are commonly used for denied services that would not involve a loan application/request.

Credit card finance charges can be confusing as they are different from a normal simple daily interest consumer loan, because billing cycles play a part in the finance charge calculation. Both current and previous billing cycles are required for the calculation to qualify for a configured grace period. Grace period flags are determined by the credit union and disclosed in their credit card disclosures. Finance charges are waived if the account qualifies for the grace period configured in the loa  More...

Printed Statement Style fees are triggered only by production of a regular account statement (based on a file called STPRINT01, which is generated only with regular statements, not CC statements) . If a member gets only a credit card statement, they wouldn’t get a fee that particular month. If the next month they get both a credit card statement and a regular statement, then they would get a fee that time. (Note: We do always produce a year-end statement for every member, no matter wha  More...

Our policy is to adhere to PCI Data Security Standard/Security Audit Procedures mandates (these are the rules from Visa about how ATM, Debit, and Credit Card information is protected) which read as follows: 3.3 Mask PAN when displayed (the first six and last four digits are the maximum number of digits to be displayed). Note: This requirement does not apply to employees and other parties with a specific need to see the full PAN; nor does the requirement supersede stricter requirements in  More...

Our system does allow for temporary or permanent changes in limits, depending on your configuration. Limit validation can be described as follows: When a transaction is received, the program looks to the current limits to approve the transaction. CU*BASE compares the date of the last transaction to the system date. If the system date and the new transaction date differ from the last transaction, daily remaining limits are then reset. This implies that the transaction may occur on a non-business  More...

If you pull credit reports using the CU*BASE online credit bureau access system, credit report data is stored online and can therefore be mined for opportunities. There are a couple of ways you can find this information: Use Tool #976 Where Your Members Borrow This tool pulls trade line data from stored credit report files, showing other financial institutions with whom your members do business. This tool lets you make a direct comparison between your credit union and a competitive FI. F  More...

The settings that control how this works are part of Tool 558 NSF/Overdraft Transfer Configuration, on the Overdraft Protection Activation screen. There are four flags: Use Negative Balance Limits for Authorizations and Use Negative Balance Limits for Posting. They control whether the member's ANR limit is added when determining the available balance amount. There are four different combinations of these flags: Authorization Flag Posting Flag Description of Result N N Negative bala  More...

CU*BASE does not perform any automated card reissues for any credit union or vendor. With the exception of two platforms*, all plastic card reissues are done for the credit union by their vendor. The normal process is the vendor sends the CU a couple of reports once monthly (usually 6 weeks out from expiration of card). One is a reissue report, the other a non-reissue report. The CU reviews and makes changes to the vendor system prior to their cutoff date for ordering the reissues. All cards   More...

It's possible but fairly rare, given how most CUs set up their statement criteria. The two statement types are independent as far as the criteria that determine whether a member gets a statement or not. Typically a CU sets up their regular account statement to look at OC (open credit) accounts, which includes online credit cards, and produce a regular statement if there is any activity. Likewise, a credit card statement is generally set up to produce a CC statement only if there is activi  More...

There are many, many components in the infrastructure that protects your member data, from passwords and daily backups to production redundancy and full-blown DR/BR plans. One important piece of that puzzle involves the protections we put in place to control data moving between the System i and a local workstation. Years ago no one ever imagined an employee popping a thousand member records onto a thumb drive and heading out the door. Today we have entire teams and sophisticated tools to prev  More...

There are several steps in removing a member's Social Security number: 1) Run a global search to see what types of relationship codes the SSN has with your credit union. 2) The first relationship codes you will want to review are the 'CB' or 'JI' which mean the non-member is a co-borrower and/or joint owner on the account. They need to be removed first. To remove them, launch Tool #3 Open/Maintian Memberships/Accounts, choose Update member information then Joint owners an  More...