CU*Answers Network Services offers 5 different a la carte options of the Managed Backups service. ( See bottom for a list of notable definitions .) In all cases, clients are responsible for regularly reviewing their backups to ensure that all desired systems and data are protected, that data is maintained on the backup systems for the desired retention period, and that data can be successfully recovered. CU*Answers does not guarantee data backup scope, recoverability, or retention periods. 1.   More...

The APY calculates the annualized rate for a savings product and adjusts for compounding. It assumes a balance of $1,000 for a 12-month term. It also assumes no withdrawals are made during the 12 month term. Truth-In-Savings (TIS) regulations require this disclosure to help people compare savings products, apples to apples, across multiple financial institutions. The APYE calculation is also required by TIS, and can be reported to members via their statement. It is the annualized rate that ta  More...

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CU*BASE in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 10, you’ll need to install Telnet. Visit https://social.technet.microsoft.com/wiki/conten  More...

If you press the SHIFT key five times in rapid succession it will ask if you would like to turn on StickyKeys. If you click OK, it will turn on StickyKeys. StickyKeys is an accessibility option in Windows that allows for someone to use the CTRL, ALT or SHIFT keys one key at a time without having to hold the keys down. To turn StickyKeys off: Click on the Start button Click Control Panel If you see “Pick a category” with 10 categories below, click Accessibility Options, and then c  More...

CU*Answers has a rolling schedule of network security audits and assessments including internal and external penetration testing. We do not limit the scope of these tests to just the online banking environment. We also do not publish the results or reports from these tests for security reasons. The test results are reviewed by our Executive Team, our Board of Directors (made up of peer credit union CEOs), as well as examiners from the NCUA and state regulatory agencies. They are also reviewed b  More...

It depends. Using shared branching does not automatically exclude you from the beta pool! But the specific changes being made can affect how your credit union works with others who are not part of the beta. The most common example is shared branching but might also include vendor relationships as well. This becomes an issue when the release includes changes to the database structure itself (new data in files or changes to the data’s format). CU*BASE requires that all of the data used   More...

Truth-In-Savings requires certain disclosures on periodic statements. One of the disclosures required on dividend-bearing accounts is the “annual percentage yield earned (APYE)”. The APYE is an annualized rate that reflects the relationship between the amount of dividends actually paid to the member’s account during the period and the average daily balance in the account for that period. *Note - this calculation uses the member’s average daily balance for the period,   More...

We do. In addition to information we can provide, we have services that will help you plan and execute your recovery test. Helpful information about Disaster Recovery/Business Continuity planning and testing can be viewed on our website at: https://www.cuanswers.com/solutions/business-continuity/ Services to help credit unions build and test their Disaster Recovery/Business Continuity plans can be found on our website at: https://store.cuanswers.com/store/business-continuity-services/business-co  More...

As a result of a January 2018 Windows 10 update, you will need to join your Windows 10 iSweep to your domain. This will be handled internally for Network Services Managed Clients, however, non-managed clients will need to have Network Services work with their IT staff/third party IT company to setup a new local account on the machine in order to join this unit to your domain and complete the additional steps. Configuring Group Policy and Active Directory Active Directory Configuration Open Act  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

To ping a network device, you will need to open a command prompt: In Windows 7, click on the Start button and type cmd (without the quotes) then press Enter. In Windows 10, type the following into the Windows Search box: cmd , and when the result appears, right click and select Run as Administrator Once the command prompt is open, you will need to type the word ping followed by the name or IP address of the network device you want to ping. To test connectivity to the High Availabil  More...

This is how to check your current network settings. The procedure varies depending on your computer's Operating System: For Windows 2000 or XP Right -click on the Start button and select Explore . Scroll to the bottom of the left hand pane, then right -click on My Network Places and select Properties . A new window will pop up and you should see Local Area Connection in the window. Right -click that connection and, again, select Properties . A separate window should pop up and you shoul  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

Unwanted Topaz Systems Driver files may be located in a few different locations depending upon which version of windows you have. You will likely need to be logged on as a local administrator to remove them. They can exist on any workstation running ProDOC regardless of whether or not a signature pad is attached. For Windows 7 or 8 The current version in use should be located here: C:\Windows\SigPlus\SigPlus.ocx and should not be removed. Before you begin make sure this is version 4.4.0.22 o  More...

To update a signature line in CU*BASE, you’ll use the Tool #497 Member Connect Marketing Tools . (You will need a file name to move forward, so it can be helpful to have a test file created in your QUERYxx library for situations like this.) NOTE: For Member Reach clients, Xtend has previously created a file ‘MBRRTEST’ that will allow you to access the Message Maintenance screen. Select Online Banking and/or email message from the first window and then use Enter. On the Mem  More...

The APY calculator is a generic calculator that does not take specific accounts or specific timeframes into account, and therefore uses a standard 365-day year. If you are comparing this to a real account, and that account’s term happens to fall across a leap year with 366 days, there may be a slight discrepancy in the exact amounts due to that leap day.

There is a table called MBRAPPSTAT which holds records of various API calls done during the entire member authentication process, even before they have successfully logged in to online banking (even if through the mobile app). That is the first place TO look to see records of what's happening with this member's account as they step through that process. There is one row for each API call, and each API call represents a different phase of the process. For example - Get Username, Get Chall  More...

GUAPPLE is short for GOLD Update Appliance. The GUAPPLE is a stand-alone network appliance that takes the place of the GOLD-Master update server PC. It is designed to seamlessly handle all of your GOLD software update retrieval tasks. No effort is required to retrieve software updates when using a GUAPPLE device. It will acquire GOLD update files automatically as well as custom loan screen updates, doing away with manually downloading and extracting software update files. One GUAPPLE unit  More...

Yes! We offer this service so that you can allow members using current versions of Quicken to download data from online banking. ( It's Me 247 will also continue to offer the older QIF file format which works with Quicken versions 99 through 2004.) As explained in the brochure (see the link below), there is a startup and an annual maintenance fee from Qucken to offer this feature to members. (CU*Answers has paid for all of the development and testing and will not charge your credit union a  More...

While it is possible that an issue someone runs into on a website is an issue with the web server or a programming issue with the site, it is very important to rule out any browser or workstation incompatibilities first. If the website is not being opened in a supported browser, for instance, it can cause errors that would otherwise not exist. So what are some standard troubleshooting steps than can be taken? Are you using the latest version of your browser? Just like any other piece of software  More...

This is an issue when trying to access the IBM iAccess Key Database that holds all the certificate information necessary for using SSL. Make sure you've run the updates.cubase.org for enabling encryption as well as the everyone permission to ensure all users can access the key database file. Next you will want to access the IBM iAccess for Windows either through Control Panel or the Start Menu and go under the Secure Sockets option. Select 'Use default key database' if not already se  More...

These message indicators appear on the CU*BASE loan insurance premium posting report (TCUNAS2 / TCUNAS3) and the Debt Protection Fee posting/exception reports (TCUNAD2 / TCUNAD3). By looking at the reports, you can tell if a premium / DP fee posted or not based on the exception. LOAN INSURANCE MESSAGES ADD SIGN There is joint coverage on this loan. There is either no 'additional signer' record, or the birth date for the additional signer is missing or invalid. JT TO SG There is joint cov  More...

The first step is to make sure your credit union has filled out the three required forms: Sign Up Form, Electronic Payment Service Agreement, and Fed ACH Participation Agreement. There is also a non-disclosure agreement to sign to receive a copy of Magic-Wrighter's SSAE-16 audit results. Once the Client Service and Education team has received the forms from your credit union, they will send the form to our third party processor, Magic-Wrighter. Magic-Wrighter will submit a confirmation with  More...

For normal releases of changes to the CU*BASE GOLD software itself, no. Updates to the core software screens (called panels) are pushed to your credit union's GUAPPLE(s), then each workstation grabs those updates the next time the software is launched (assuming there are no open sessions already running). The exception to this is when we need to deploy updates to the LegaSuite client software itself. This is the client software that runs on the workstation to facilitate the use of CU*BASE  More...