This occurs when the release includes changes to the files that your Query uses. For example, if we add a new field to the MASTER file, any Query you have that uses that file will display an error message. Fortunately, it is very easy to refresh your Query so that you can use it again. All you need to do is access the Query and save it. That's all. You don't have to make changes to it, it's just important that you save it so it can refresh itself to match the new file layout.   More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

Yes, between the Apply for Loan Today / Contact Me About my Score button and the disclaimer is a content section, an area that can be modifed via a configuration in CU*BASE. Launch tool #569 Online/Mobile/Text Banking VMS Config. Select Credit Scores History Sales Text and use Select or Enter. Use the screen that appears to enter a URL to one of your web pages as well as the Comments that you would like to appear on the page to explain the feature to your members.

The iPay Customer Support staff can be reached at 877-434-4729 .

You can Query the PCALTCFG file for information on e-Alerts and e-Notices. This file will show you all members who have signed up for these items, including an column indicating whether the member signed up to receive the alert via email or text message. In the alert type field, the types codes are as follows: AC = ACH transaction AB = Account Balance LN = Loan Payment Due NP = e-Notice

Use the link below to read about this in CU*BASE GOLD online help.

Use Tool #654 “Print List of Custom Rpts/Inqs”

Custom reports created using the CU*BASE Report Builder (Query) will only print what will fit on a standard width of paper (usually 132 characters). If you cannot eliminate some of the columns, try using the Format Columns option to shorten the length of some the columns in your report and/or abbreviate the column headings. Also try using the Choose output feature to activate the line wrapping option and/or adjust the wrapping width. Query

This link has all communications sent out from Fiserv and messages received from the member.

For things like expanded balance and transaction $ amounts, Query will automatically adapt to larger amounts, and you generally won’t need to do anything. (The only exception is if you send the output to a vendor, they’ll need to be made aware of the larger amounts. Or perhaps if your report is completely full side to side and you need to remove a column in order for everything to still fit across a printed page.) As far as dates, if a date was formerly 3 separate fields for year  More...

If you are requesting an EOM tape to be loaded from a month prior to your conversion to FEP in 2014, we will automatically convert it for FEP “on the fly” so that you can run Queries over it or print the report you need.

Yes, you can choose to customize the page to which It's Me 247 navigates whenever a member clicks the logout button. For example, Western Districts Members CU has the custom logout set to go to https://wdmcu.org/youve-successfully-logged-out/ , a page on the credit union's website used to promote other credit union services in which online members might be interested. Websites with this feature are It's Me 247 online and mobile web banking, BizLink 247 business banking (formelry kn  More...

Whenever you add files to your Query definition or remove files from it, you also need to refresh the automation configuration, which is basically just a list of the files needed by the Query and must match the Query definition. See the link below for step-by-step instructions.

If you are interested in being able to find out how many mobile phone numbers you have in your database, instruct your team to take advantage of the Mobile phone checkbox, which can be checked for any stored contact number. Then when creating a Query of the MASTPH file look for numbers with a Y in the MTPEFT field.

The tables to use for your custom data (this is also called Unique Data Management or UDM) are as follows: For membership-level custom fields: CMSCFDTA For account-level custom fields: CMBCFDTA

Download the Software Note: Our network requirements have been updated and can be found here . Please verify with your IT vendor that these changes have been put into place before attempting to download Station Control. You can download CBX from this link . Site-Four clients please use this link . Instructions for Manual Install of CBX Station Control Run the downloaded CBX Install Suite Prod CBX1.exe installer. This will require administrative privileges on the workstation. 1. On the CBX In  More...

Yes. The CU*BASE Budget tool is designed to set the base budget by using the historical record-keeping features of its General Ledger. Through the comparison of historical budgets and actual financial activity, CU*BASE can project a detailed budget in a single pass. Once your Budget is created, you can then use the Finanical Report Configuration to bring in your budget totals to perform your analysis.

Previously, credit unions used Code 38 for “Return to Maker”, but this code is no longer available in the system. This change was initiated by a Reg CC change in 2018. Now, if you are presented with a situation where you need to return a check to another institution, it is recommended that you use one of these codes to clarify the reason for the check return. Some codes allow you to make the change in CU*BASE. Others require that you contact your Check Item Processor. Read below for   More...

The CU*BASE Budget tools are not intended to project your entire balance sheet. While some software products do that, that was never our intent. Our purpose in modeling select assets and liabilities is to create a projection to be used to calculate the income and expense for the budget. It results in a few simple things: You can create reports to present how you see member balances growing in the future. You can create reports to present the actual member balance in comparison to your project  More...

Yes. As long as you’ve set up your Budget Groups carefully, the modeling steps (Steps 5-8) can be done before, after, or simultaneously with the classical budgeting steps (Steps 9-10). Use your Budget Groups to help you stay organized and keep careful track of which G/Ls are being worked in each step. You’ll also need to coordinate any adjustments to your Budget Controls to make sure the proper G/L types are opened or closed at the appropriate times.

Yes. We call that the “classical” budgeting method and you can do this without using any of the modeling tools if you like. You’ll still need to do steps 1 2 to configure your chart of accounts, then proceed directly to step 9 and budget all of your income and expenses using the same technique, using as many passes as needed for different calculation parameters.

You can use a third party tool to work your asset and liability projects and the associated income and expenses. Just remember that you can only upload the income and expense figures into your budget. The upload tool does not support uploading resulting balances for asset and liability G/Ls.

When it comes to filling in your budget worksheet, it’s important to understand the distinction between the classical budgeting calculation (% increase or decrease based on previous year figures), versus how the modeling projections are determined: With the classical budgeting tools, CU*BASE calculates individual branch G/L figures, one month at a time, using previous year data, then shows you the total of those figures on the screen – it does not figure a total then spread it among   More...

Yes, this is possible in most cases, at least for the monthly balances that are used by most budgeting tools and trending dashboards. Since importing detailed history of debits and credits to G/L accounts might not be possible, keep in mind that functionality may still be limited for some tools. Contact Keegan Daniel, VP Professional Services, at kdaniel@cuanswers.com to discuss your options for either flooding data into your database or manually entering data that could be used by the budget to  More...

This comes from the Workstation Device Configuration in CU*BASE. To view or change this: Launch Tool #326 CU Hardware Configuration Select Terminal/Workstation In the list of workstations, locate the ID of the workstation you are looking up and double click on it (or just type the ID and press Enter) This will open up the terminal's configuration in CU*BASE. In the middle is the list of default printers where your documents will print: General Printer - this will be the printer to which a  More...