CNS offers our clients a variety of solutions to maintain software hygiene on their networks. Most of these solutions are automated, and with user cooperation to complete reboots, it's relatively easy to keep your systems up to date with current software versions. However, there are some important limitations to the automated processes that are important to understand. This article presents those considerations. For Complete Care Clients that do NOT Elect Third Party Patching Services:   More...

There are four types of debt protection plan types. 1= Single, 2=Joint, 3=Co-Borrower, 4= Blended. The transaction descriptions are: 1. SIngle Debt Pro Fee, 2. Joint Debt Pro Fee, 3. Co-borrower Debt Pro and 4. Blended Debt Pro Fee.

Previously, credit unions used Code 38 for “Return to Maker”, but this code is no longer available in the system. This change was initiated by a Reg CC change in 2018. Now, if you are presented with a situation where you need to return a check to another institution, it is recommended that you use one of these codes to clarify the reason for the check return. Some codes allow you to make the change in CU*BASE. Others require that you contact your Check Item Processor. Read below for   More...

Download the Software Note: Our network requirements have been updated and can be found here . Please verify with your IT vendor that these changes have been put into place before attempting to download Station Control. You can download CBX from this link . Site-Four clients please use this link . Instructions for Manual Install of CBX Station Control Run the downloaded CBX Install Suite Prod CBX1.exe installer. This will require administrative privileges on the workstation. 1. On the CBX In  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CU*BASE in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 10, you’ll need to install Telnet. Visit https://social.technet.microsoft.com/wiki/conten  More...

What This Message Means: This appears when the member has tried 3 times to enter their password incorrectly. The message does instruct the member to click I forgot my password and answer all three Security Questions to reset the password themselves. But if the member doesn't know their password or their security questions, they will need to contact the CU. BE CAREFUL: This is a scenario that presents the most risk to your members. If a bad guy finds out a member's name, account nu  More...

To ping a network device, you will need to open a command prompt: In Windows 7, click on the Start button and type cmd (without the quotes) then press Enter. In Windows 10, type the following into the Windows Search box: cmd , and when the result appears, right click and select Run as Administrator Once the command prompt is open, you will need to type the word ping followed by the name or IP address of the network device you want to ping. To test connectivity to the High Availabil  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

In the past, when reporting credit cards to the bureau, CU*Answers sends the maximum disbursement limit field for both the high credit amount and the max credit limit fields. Effective with the CU*BASE 11.4 Software Release (Nov/Dec 2011), a change was made so that this is no longer true. For open-end loans, we will report the larger of the Crrent Blance or the calculated High Credit Amount. Since members can draw on these loans at any time, the High Credit Amount will be determined using the   More...

There are two primary reasons we charge this fee: Our belief that we should do our best to keep our fees down when credit unions do not earn. This is why, for example, It's Me 247 mobile web is offered free to our credit unions. It's also behind our constant pressure to reduce fees where CUs have no basis or belief they can charge for a defensive, relationship service. Charging for these services in this manner fund other areas where the direct expenses cannot easily be identified wi  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

There are two methods used to track delinquent loans for reporting purposes in CU*BASE: Method One (for Collections tracking) We have always tracked delinquency in two separate fields for “Months” and ‘Days” in the member files. When a loan is 30 days delinquent, it shows as “0 Months, 30 Days” delinquent. When a loan is 31 days delinquent, it is “1 Month, 0 Days” delinquent. A month is always considered 30 days regardless of the actual number o  More...

​ For General Support and CU*BASE Assistance: Use the AnswerBook to submit a question to the Client Services and Education team. You can access the AnswerBook via a CU*BASE session by selecting the @ symbol and asking a question, or by logging in and asking a question. You can also call 616-285-5711 or 800-327-3478 and follow the menu prompts to reach a representative. For Technical Support: Use the ConnectWise ticketing system to submit a question to the Network Services team. ConnectWise   More...

If you pull credit reports using the CU*BASE online credit bureau access system, credit report data is stored online and can therefore be mined for opportunities. There are a couple of ways you can find this information: Use Tool #976 Where Your Members Borrow This tool pulls trade line data from stored credit report files, showing other financial institutions with whom your members do business. This tool lets you make a direct comparison between your credit union and a competitive FI. F  More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau . If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following types  More...

There is a credit union-level on/off flag where you can disable auto-security as an option for ALL of your employees. To access this, launch Tool #327 Employee Security and use the CU Options button. If auto-security is enabled, anyone can choose to activate it if they wish, either manually by clicking the button at the bottom of the home page, or via their Preferences. As a compromise, if you have some employees who share workstations and therefore need to be able to enter an ID as they acc  More...

When a device first connects to the iSeries, a virtual device is created - consider it a placeholder for that workstation or printer. Only one device can exist for each ID, which is why only one person can sign into a printer at a time. Throughout the virtual devices lifecycle, there are several different statuses that device can be in. Read below for some details! Workstations VARY ON PENDING - this is the default status of the virtual device. This status means the device is ready and wai  More...

Trust accounts can be set up as either individual or organizational depending on the legal nature of the trust. Following are recommendations for handling situations when a member wants to set up a membership where the primary member and the first joint owner are, in essence, the same person. This happens most often for trust accounts. Currently in CU*BASE there are two ways to handle trusts: For trusts that use a person’s SSN (where you do not have a separate TIN for the trust), set up th  More...

In a nutshell, you will set up a Membership Designation Code for Representative Payee, with the label for primary name set to Beneficiary and the label for the joint owner name set to Rep Payee. Then the procedure is to open the membership in the beneficiary's name and SSN, then put the representative payee's SSN as the joint owner (type J secondary name link). TIPS: Remember that in CU*BASE the words joint owner simply are used to describe a particular record type in the Se  More...

Simply put, it is a way for your members to continue using interactive services such as audio response and online banking, ATM/debit cards, and online credit cards for their financial needs, even while CU*BASE is off line for normal daily or monthly processing. CU*BASE uses a special style of stand-in processing that allows for continued use of CU*TALK audio response and It's Me 247 online banking services even during the night when we perform end-of-day and end-of-month processing. Refe  More...

The following old special Comment codes are no longer valid now that your credit data is being reported using the Metro 2 format: BU BV BW BX BY CA CB Instead, use the Consumer Information Indicator field on the loan account to report bankruptcy. This can be changed using Tool #20 Update Account Information on the loan account (click the Credit Reporting Info button to display the the Credit Bureau Reporting Information screen). NOTE: You only need to report bankrtupcy once. If the bankrupt  More...

Yes. There is an Amortization Default option available in each of your Loan Product Code configurations which allows credit unions to default amortization criteria such as: Delinquency Fine Code, Rate, Payment Frequency, # of Payments etc. The system will then default this value into the applicable fields when creating a new loan request. These defaults are intended to provide consistency for all new loan requests, but can be changed/edited during the loan request process if necessary.