NMS will need access to Tool #3555 NMS Combine Surf Files . This is custom tool, which means we will need to adjust settings on our end so your credit union has access to the tool. This is normally done as part of a regular CU*BASE release, although special arrangements can be made. Contact a CSR for assistance. Once the tool is activated for you, then your credit union's security officer will be able to grant NMS authority to the tool as usual via CU*BASE Employee Security. Once the user h  More...

The fields are related to Process Codes, in that they are derived from the code attached to the message received from the plastics processor (vendor, or switch). The Type you see in the initial Type column of the Activity screen relates directly to the Transaction Description when you view additional transaction details. Transaction types may not apply to all vendors. Examples of these labels are as follows: DEP (Deposit Transactions) ATM/DEP A deposit made at an ATM. ATM/DEP - including a $  More...

First, verify that the SigPlusBasic software is installed on your workstation. If it is there should be a Program Files\SigPlus folder. If there isn't, install it through the installation disk that came with the signature pad. Once it is installed, follow these steps: 1. Verify that the signature pad is connected to the computer. 2. Locate the Demo.ocx program and run it. Depending on how the SigPlusBasic software was installed it, there may be a shortcut on your desktop otherwise the Demo.o  More...

The first thing to do is make sure all the cables are connected securely to the printer and the PC. Be sure to note if one of the cables is a network cable. If all of the cables are securely connected and you still cannot print, restart the PC and the printer. If you receive the same error once the printer and PC are back up, there is likely a hardware issue with the printer. If one of the cables that plugs into the printer is a network cable then the Jet Direct card (a network interface   More...

Note: this procedure also works with Carswell printers. (1) Turn the printer off. (2) Hold the FEED button while turning the printer back on. (3) Continue to hold the FEED button until the error light starts flashing. (4) Clear the paper by pressing the FEED button. If successful, a receipt printer settings page will print. Your printer's memory is now cleared. If this is not successful, please contact the Network Services Help Desk for assistance.

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

Truth-In-Savings requires certain disclosures on periodic statements. One of the disclosures required on dividend-bearing accounts is the “annual percentage yield earned (APYE)”. The APYE is an annualized rate that reflects the relationship between the amount of dividends actually paid to the member’s account during the period and the average daily balance in the account for that period. *Note - this calculation uses the member’s average daily balance for the period,   More...

**Please note that the implementation of this change was previously scheduled to occur on Tuesday, January 26, 2021. We identified the need for adjusments before deployment, and the implementation was rescheduled for Tuesday, February 9, 2021** On February 9 th 2021, CU*BASE will begin using only phone numbers that are stored in the MASTPH file when generating card activation information to send to vendors on initial card orders. The numbers in MASTPH are determined by the label/flag applied i  More...

The General Printer ID that is specified in Tool #326 CU Hardware Configuration does not control where screenshots are printed. The screen shot configuration needs to be changed on the virtual workstation device. Contact the network help desk for assistance. There should be 3 sessions per workstation (G0, G1, and G2). The screen shot printer can be modified here.

Simply put, it is a way for your members to continue using interactive services such as audio response and online banking, ATM/debit cards, and online credit cards for their financial needs, even while CU*BASE is off line for normal daily or monthly processing. CU*BASE uses a special style of stand-in processing that allows for continued use of CU*TALK audio response and It's Me 247 online banking services even during the night when we perform end-of-day and end-of-month processing. Refe  More...

There are two major points to consider when thinking about allowing members to see information beyond the account to which they are actually logged in. Both extend beyond online banking to consider a financial institution’s role and responsibility in protecting member private data via all access channels, from the teller line to a back office employee answering a phone call. (1) How does a credit union generally recommend or facilitate a member giving access to their private informatio  More...

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CU*BASE in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 7 or Windows 10, you’ll need to install Telnet. Visit http://technet.microsoft.com/en-us/  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

When a credit union statuses a member's card as 'HOT' or warm (Lost/Stolen/Fraud/Restricted), this information is transmitted immediately to your vendor to stop any further withdrawals/purchases being performed with that particular card. But at your vendor a 'Hot Card' is not considered to be a closed card. When your member's card remains at a HOT or Warm card status on CU*BASE, CU*BASE is still required to send any maintenance updates such as address change, phone numbe  More...

There are two methods used to track delinquent loans for reporting purposes in CU*BASE: Method One (for Collections tracking) We have always tracked delinquency in two separate fields for “Months” and ‘Days” in the member files. When a loan is 30 days delinquent, it shows as “0 Months, 30 Days” delinquent. When a loan is 31 days delinquent, it is “1 Month, 0 Days” delinquent. A month is always considered 30 days regardless of the actual number o  More...

Make sure that drivers for the printer are loaded on the PC on which you are building the session. Test the drivers by printing a windows test page unless you are using a thermal receipt printer. DO NOT SEND WINDOWS TEST PAGES TO THERMAL RECEIPT PRINTERS! Once you know the printer is set up correctly, then perform the following steps: 1) Go to Start>Programs>IBM Client Access Express>Emulator>Start or Configure Session. 2) Select Configure. 3) Set the System Name to WESCPROD.  More...

The following old special Comment codes are no longer valid now that your credit data is being reported using the Metro 2 format: BU BV BW BX BY CA CB Instead, use the Consumer Information Indicator field on the loan account to report bankruptcy. This can be changed using Tool #20 Update Account Information on the loan account (click the Credit Reporting Info button to display the the Credit Bureau Reporting Information screen). NOTE: You only need to report bankrtupcy once. If the bankrup  More...

There are two ways to accomplish this: The first way is to use the Marketing Opt-Out flags on the member's MASTER record. Introduced in the CU*BASE 9.2 release (August 2009), these are two flags that can be checked to exclude the member from third-party marketing communications and/or CU-related marketing commnunications. See the Opt Out link below to read more about the use of these flags. When creating a database file using Member Connect tools, or the CU*BASE List Generator, or even t  More...

CU*BASE GOLD requires that the following networks be routed to the CU*Answers CU*NextNET connection: For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from the LAN Required for standard Production connectivity: 63.236.240.16/28 63.236.240.48/28 63.236.240.79/32 63.236.240.128/29 63.236.240.138/32 63.236.240.144/28 Required for HA/Disaster Recovery connectivity: 216.111.149.8/30 216.111.149.16/28 216.111.149.240/28 66.115.246.224/27 In addition to t  More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...

The only requirement for installation of version 1.1.7.3 Build 8031 IBM iAccess is Admin privileges on the workstation to perform the install. It will install for all users, and it will install a 32bit or 64bit version based on the computer’s configuration. This installer is available through a link on updates.cubase.org (it will read, ‘IBM System I Install: Click Here’). Once the installer is download, right click on the file and select ‘Run as administrator’. The   More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau. If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following type  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

The Automated Clearing House (ACH) is a nationwide mechanism that processes electronically originated batches of credit and debit transfers. ACH credit transfers include direct deposit payroll payments and payments to contractors and vendors. ACH debit transfers include consumer payments on insurance premiums, mortgage loans, and other kinds of bills. Debit transfers also include new applications such as the point-of-sale (POS) check conversion pilot program sponsored by the National Automated C  More...

After enabling session encryption, GOLD may present a Warning T02 error message and not launch. Here is a screenshot of the error: If you encounter this error message, there may be an issue with your workstations local certificate store. We have identified a few possible causes. Typically, your workstation has several expired certificates in the store that are causing conflicts; or your workstation does not have the correct GoDaddy intermediate certificates. Follow the steps below to corre  More...