Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

This report uses the field called Disbursed Amount in the MEMBER5 or MEMBER6 data file. This is an accurate representative total of the amount that was added to your loan portfolio. Other reports, such as the Contingent Liability Analysis Report (Tool #280), use the Disbursement Limit to derive the amount of contingency balance by subtracting the current balance from the disbursement limit.

While in the initial Purpose Code configuration screen, click the printer icon at the top of the screen and a report is produced of the codes configured. (Use the Related Link below to see a picture of this icon.)

When you see the 'pass decision' status, this means that the application passed your filters and then passed the model. The underwriting ratios are not a hard stop and will not cause an application to pass or fail. Based on the workflow, a model is requested and a decision has already been made by the time those ratios calculated. The ‘fail’ flag in the underwriting ratio is simply a visual indicator to the loan officer that the ratio is potentially higher than normal.   More...

All loan types that are configurable by your credit union can use CLR Path. There are no database restrictions.

While in the initial Security Code configuration screen, click the printer icon at the top of the screen and a report is produced of the codes configured. (Use the Related Link below to see a picture of this icon.)

When creating a loan category that will be using a new suffix range, you will need to first create the account suffixes using Tool #105 Account Suffix Configuration. Choose the option Type from the drop-down and hit enter. Fill in the Account type range and enter - this must be done before filling the 3 following fields. Then fill out the Application type, Description, and Receipt description fields and enter. Once the account type range has been established, you can use the suffixes in you  More...

The large loan payment was applied as a principal-only payment, which does not move the next payment due date on the loan. When the payment was reversed using the 95 reverse loan payment code, the due date was backed up and made the loan delinquent. That evening, the Auto Funds Transfer system tried to satisfy the delinquency on the loan because the delinquency control flag was turned on in the AFT record. Whenever you reverse a loan payment, make sure to review the loan due date before an  More...

Updates to fields such as address, phone number, mother’s maiden name, email, or code word, as well as phone number deletion, re-arranging phone numbers by Seq #, and changing phone number flags triggers a vendor maintenance record. Please be aware, any maintenance will update all cards attached to that membership! When a maintenance record is triggered, the phone numbers in CU*BASE will be transmitted to the vendor as they are labeled in MASTPH. This means that if the Primary phone number  More...

Yes. There is an Amortization Default option available in each of your Loan Product Code configurations which allows credit unions to default amortization criteria such as: Delinquency Fine Code, Rate, Payment Frequency, # of Payments etc. The system will then default this value into the applicable fields when creating a new loan request. These defaults are intended to provide consistency for all new loan requests, but can be changed/edited during the loan request process if necessary.

In some cases, the general upload file that is received by CU*Answers on a daily basis only contains accounts where a member has had a change to their account. Contact your OTB vendor to see if you can request a full file to be sent so that all card information would be sent in the upload file to CU*Answers. (In some cases if your CU is already being charged for the upload it is possible there would be no change in price to have the full file sent over.)

Printed Statement Style fees are triggered only by production of a regular account statement (based on a file called STPRINT01, which is generated only with regular statements, not CC statements) . If a member gets only a credit card statement, they wouldn’t get a fee that particular month. If the next month they get both a credit card statement and a regular statement, then they would get a fee that time. (Note: We do always produce a year-end statement for every member, no matter wha  More...

There are three important components to the It's Me 247 Online/Mobile Banking User Agreement: The agreement itself The master date on the credit union's Online Banking/ARU Configuration (you can see this via Tool #140 ARU/Online Banking Controls Inquiry ) The agreement accepted date on the individual member’s record (you can see this via Tool #72 Update ARU/Online Banking Access ) The important thing to remember is that we have only one agreement. The trick is whether we pre  More...

CU*BASE does have several different places where product descriptions can be configured, each used for different purposes. It's common for the descriptions to be entered the same into each configuration, but there are reasons why they are sometimes slightly different. For example, if you use the same range of account suffixes across several of your checking account products, your account suffix description might be something general like Checking whereas the description entered into the   More...

When members receive an error code of 1 or 2, there is a very simple fix for it in CU*BASE. It's Me 247 online banking and bill pay (Fiserv) programs communicate with each other automatically through an authentication PIN every time we go from one to the next. When we see a status code of 1 or 2, it is telling us there is an issue with this PIN. It is easy to reset and the member will be able to get into bill pay within 24 hours. Launch Tool # 14 Member Personal Banker. Enter the member&r  More...

In one of three ways: Note: The term 'subscriber' refers to your 'member'. Electronic Payments (ACH) - Fiserv's preference is to send all payments electronically. However in the Risk Model format it is not always feasible. Fiserv submits the merchant payment (via the fed) from a Fiserv settlement account the same day we submit the debit (via the fed) to the subscriber account. Fiserv is taking the risk on the payment. Electronic payments are typically sent when the subscr  More...

The most likely reason is that the member did not have any activity for the month that would trigger a statement, based on the CU's configuration. Most credit unions have their statement configuration set up to print a monthly statement only if the member has a checking account, and only if there is activity on that account, saving postage costs on months when there is no activity. You can verify this by viewing his Share Draft Transaction Inquiry in Phone Operator, then compare that to yo  More...

In this particular member's situation there was no activity in either October or November that triggered a statement. The credit union's quarterly (and year-end) statements are configured to produce a statement for every member, regardless of activity level, but monthly statements are more restrictive in an attempt to save postage costs, and not every member gets a statement every month. NOTE: CU*BASE statements have a considerable number of configuration options that allow credit unio  More...

This comes from Fiserv's records, which are provided to them by the Federal Reserve (through the FRB's Checks Department).

It's possible but fairly rare, given how most CUs set up their statement criteria. The two statement types are independent as far as the criteria that determine whether a member gets a statement or not. Typically a CU sets up their regular account statement to look at OC (open credit) accounts, which includes online credit cards, and produce a regular statement if there is any activity. Likewise, a credit card statement is generally set up to produce a CC statement only if there is activi  More...

To update a signature line in CU*BASE, you’ll use the Tool #497 Member Connect Marketing Tools . (You will need a file name to move forward, so it can be helpful to have a test file created in your QUERYxx library for situations like this.) NOTE: For Member Reach clients, Xtend has previously created a file ‘MBRRTEST’ that will allow you to access the Message Maintenance screen. Select Online Banking and/or email message from the first window and then use Enter. On the Mem  More...

They will not get unenrolled for eStatements, but their email will be marked as a wrong email address. This will cause the member to receive a printed statement that month, and the normal e-Statement fee/rebate will not be posted. The next time they log in to online banking, they will see a banner ad alerting them to the fact that their email is flagged as invalid or missing and that features such as eStatements require a valid email. eStatement

If the member closed their account in November, they would receive a final statement for their November transactions but will not receive a December Statement as they did not have any transactions in December and the account was not active. This would also be true for members who closed their accounts earlier in the year. For example, for a membership closed in April, the member will receive their final statement at the end of April then will not receive another statement again (not even the q  More...

The Closed Account Report and the Closed Membership Report have two versions. LCLACE and LCLMBE are the daily reports that run at EOD. These reports show closed accounts and closed memberships for a single day. LCLAC and LCLMB are the reports that are run from the CU*BASE menu and via Report Automation, and these show closed accounts and closed memberships for a given month.

When you get the check copy and verify beyond a doubt that it was not the intended biller who cashed the check, re-open the case with Fiserv. Explain that the check was wrongfully deposited, explain your verification processes, and ask for Fiserv's assistance with a refund to the member. They will contact the Federal Reserve and work to get the money back. This can only be done with a Corporate Check. If it was a Member Draft, then the credit union would need to assist the member in reclai  More...