Previously, credit unions used Code 38 for “Return to Maker”, but this code is no longer available in the system. This change was initiated by a Reg CC change in 2018. Now, if you are presented with a situation where you need to return a check to another institution, it is recommended that you use one of these codes to clarify the reason for the check return. Some codes allow you to make the change in CU*BASE. Others require that you contact your Check Item Processor. Read below for   More...

This comes from the Workstation Device Configuration in CU*BASE. To view or change this: Launch Tool #326 CU Hardware Configuration Select Terminal/Workstation In the list of workstations, locate the ID of the workstation you are looking up and double click on it (or just type the ID and press Enter) This will open up the terminal's configuration in CU*BASE. In the middle is the list of default printers where your documents will print: General Printer - this will be the printer to which a  More...

Download the Software Note: Our network requirements have been updated and can be found here . Please verify with your IT vendor that these changes have been put into place before attempting to download Station Control. You can download CBX from this link . Site-Four clients please use this link . Instructions for Manual Install of CBX Station Control Run the downloaded CBX Install Suite Prod CBX1.exe installer. This will require administrative privileges on the workstation. 1. On the CBX In  More...

If you pull credit reports using the CU*BASE online credit bureau access system, credit report data is stored online and can therefore be mined for opportunities. There are a couple of ways you can find this information: Use Tool #976 Where Your Members Borrow This tool pulls trade line data from stored credit report files, showing other financial institutions with whom your members do business. This tool lets you make a direct comparison between your credit union and a competitive FI. F  More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...

There are two primary reasons we charge this fee: Our belief that we should do our best to keep our fees down when credit unions do not earn. This is why, for example, It's Me 247 mobile web is offered free to our credit unions. It's also behind our constant pressure to reduce fees where CUs have no basis or belief they can charge for a defensive, relationship service. Charging for these services in this manner fund other areas where the direct expenses cannot easily be identified wi  More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

There are two methods used to track delinquent loans for reporting purposes in CU*BASE: Method One (for Collections tracking) We have always tracked delinquency in two separate fields for “Months” and ‘Days” in the member files. When a loan is 30 days delinquent, it shows as “0 Months, 30 Days” delinquent. When a loan is 31 days delinquent, it is “1 Month, 0 Days” delinquent. A month is always considered 30 days regardless of the actual number o  More...

When you use the filter buttons on the File Maintenance Inquiry dashboard (Tool #159: Audit File Maintenance Inquiry (CUFMNT)), indicators note which programs, fields/columns, and files/tables AuditLink has flagged as “critical” for auditing teams to monitor on a daily basis. You can quickly sort by that indicator and select only those items for a quick scan of maintenance that directly affects member accounts. Below is a listing of these critical items. Columns/Fields Field Why   More...

GUAPPLE is short for GOLD Update Appliance. The GUAPPLE is a stand-alone network appliance that takes the place of the GOLD-Master update server PC. It is designed to seamlessly handle all of your GOLD software update retrieval tasks. No effort is required to retrieve software updates when using a GUAPPLE device. It will acquire GOLD update files automatically as well as custom loan screen updates, doing away with manually downloading and extracting software update files. One GUAPPLE unit  More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

Trust accounts can be set up as either individual or organizational depending on the legal nature of the trust. Following are recommendations for handling situations when a member wants to set up a membership where the primary member and the first joint owner are, in essence, the same person. This happens most often for trust accounts. Currently in CU*BASE there are two ways to handle trusts: For trusts that use a person’s SSN (where you do not have a separate TIN for the trust), set up th  More...

The NSF Statistics Dashboard (Tool #557) will track this information for you automatically. It is separated into the NSF category and the Courtesy Pay Category. Credit unions are using this dashboard to help predict averages of NSF/Courtesy Pay fee income and also to track how many members may be using the service. You can click on any of the origins (listed in blue text) and you can drill further to members who had more than X transactions in a specific month. There are a lot of graphical oppor  More...

You can Query the PCALTCFG file for information on e-Alerts and e-Notices. This file will show you all members who have signed up for these items, including an column indicating whether the member signed up to receive the alert via email or text message. In the alert type field, the types codes are as follows: AC = ACH transaction AB = Account Balance LN = Loan Payment Due NP = e-Notice

These files should automatically be placed into the correct spots to ensure that Iaccess continues to work without any problems. If you want to verify that you have received this file you can follow these few steps: Open My computer Navigate to c:\users\public\documents\ibm\client access\ Verify the current file size of “cwbssldf.kdb” If this file size is 30kb then everything worked correctly and you don’t have to do anything else. If this file size is different follow steps   More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau . If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following types  More...

When a device first connects to the iSeries, a virtual device is created - consider it a placeholder for that workstation or printer. Only one device can exist for each ID, which is why only one person can sign into a printer at a time. Throughout the virtual devices lifecycle, there are several different statuses that device can be in. Read below for some details! Workstations VARY ON PENDING - this is the default status of the virtual device. This status means the device is ready and wai  More...

This occurs when the release includes changes to the files that your Query uses. For example, if we add a new field to the MASTER file, any Query you have that uses that file will display an error message. Fortunately, it is very easy to refresh your Query so that you can use it again. All you need to do is access the Query and save it. That's all. You don't have to make changes to it, it's just important that you save it so it can refresh itself to match the new file layout.   More...

No. The way that normal CU*BASE features work is to use the CU*BASE Workstation Configuration settings to determine a default printer for certain functions, or you can choose a printer directly when printing most CU*BASE reports. But since IBM Query is not a CU*BASE program but rather a generic program offered by IBM, it does not have any way of looking at CU*BASE configs for the info it would need to direct the print job. Therefore a Query definition will go to your list of spooled files and  More...

There are several ways to obtain this data. To see the total number of active online banking members, use Tool #856 Tiered Svcs Monthly Comparison to display active user counts for any monthly period. (HINT: Click the Goal 4 button to display this data.) This can be done even if your credit union does not use Tiered Services for any other purpose. To print a report of usage statistics, use Tool #141 ARU/Online Banking Stats Dashboard To see online banking usage stats for a particular m  More...

If you need to allow an employee to perform upload and/or download tasks (FinCEN, AIRES, ALM, uploading G/L entries to post, etc.), you must first complete the iShield Security Access Request form and have it signed by your credit union’s designated Security Officer to sign. Once our Client Services team receives your signed form and verifies it, a request will be submitted to our System i administrators, and you will be notified when the new permissions have been granted. This process wi  More...

Simply put, it is a way for your members to continue using interactive services such as audio response and online banking, ATM/debit cards, and online credit cards for their financial needs, even while CU*BASE is off line for normal daily or monthly processing. CU*BASE uses a special style of stand-in processing that allows for continued use of CU*TALK audio response and It's Me 247 online banking services even during the night when we perform end-of-day and end-of-month processing. Refe  More...

The previous tools used for uploading and downloading to and from CU*BASE will be retired when your credit union recieves the 20.07 CU*BASE software release. For online and Site-Four credit unions, that date is Sunday, July 12. Self-processing credit unions will receive the release the following Sunday, July 19. To replace the two tools, a new tool was introduced in November 2018, Tool #1375 Data Transfers (Upload or Download) . Following the release, this tool will be the default data transfer  More...

In a nutshell, you will set up a Membership Designation Code for Representative Payee, with the label for primary name set to Beneficiary and the label for the joint owner name set to Rep Payee. Then the procedure is to open the membership in the beneficiary's name and SSN, then put the representative payee's SSN as the joint owner (type J secondary name link). TIPS: Remember that in CU*BASE the words joint owner simply are used to describe a particular record type in the Se  More...