There are four types of debt protection plan types. 1= Single, 2=Joint, 3=Co-Borrower, 4= Blended. The transaction descriptions are: 1. SIngle Debt Pro Fee, 2. Joint Debt Pro Fee, 3. Co-borrower Debt Pro and 4. Blended Debt Pro Fee.

With the 16.10 release we have developed a new cross-reference system that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” Refer to the linked to Answer Book items for more information about this feature. At implementation of the release two reports were placed in your credit union’s HOLDxx OUTQ. The first, CNV40003, lists all  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

CNS offers our clients a variety of solutions to maintain software hygiene on their networks. Most of these solutions are automated, and with user cooperation to complete reboots, it's relatively easy to keep your systems up to date with current software versions. However, there are some important limitations to the automated processes that are important to understand. This article presents those considerations. For Complete Care Clients that do NOT Elect Third Party Patching Services:   More...

Download the Software Note: Our network requirements have been updated and can be found here . Please verify with your IT vendor that these changes have been put into place before attempting to download Station Control. You can download CBX from this link . Site-Four clients please use this link . Instructions for Manual Install of CBX Station Control Run the downloaded CBX Install Suite Prod CBX1.exe installer. This will require administrative privileges on the workstation. 1. On the CBX In  More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

Credit Union ABC has activated the Reg E opt in/opt out feature and has configured a NSF fee. John Smith, a member of ABC Credit Union, has elected to opt out of receiving overdraft services. John will not be charged an NSF fee on one-time PIN ATM Debit (13) and Debit Signature (16) transactions. John will be charged an NSF fee on any recurring PIN ATM Debit (13) and Debit Signature (16) transactions, which are not covered by the member's Reg E opt in/opt out setting.

Special care should be taken when adding distribution records for a member who has more than one deposit coming for the family from the same institution. Take the time to research the member ACH records using the ACH inquiry screen, and if there isn't enough information on this screen, go to CU*SPY and find the PACXTB report to review the ACH detail. For example, the Smith family receives three ACH payments for Social Security benefits: one for the husband, John, one for the wife, Mary, and   More...

The first thing to do is make sure all the cables are connected securely to the printer and the PC. Be sure to note if one of the cables is a network cable. If all of the cables are securely connected and you still cannot print, restart the PC and the printer. If you receive the same error once the printer and PC are back up, there is likely a hardware issue with the printer. If one of the cables that plugs into the printer is a network cable then the Jet Direct card (a network interface   More...

NSF Origin Codes: 1 = Teller posted below available balance; 2 = Checks reversed as NSF; 11 = ACH reversed as NSF; 13 = NSF ATM not returned; 16 = NSF Debit not returned; 81 = ACH posted below available balance; 82 = Check posted below available balance; 83 = ATM posted below available balance; 86 = Debit card posted below available balance.

Starting with the 16.10 release, credit unions can begin allowing AFTs with accounts that are “off the books” including accounts set up with the CU*BASE Account to Account (A2A) and CU*BASE “Off Trial Balance” (OTB) feature. The screen used for delinquency handling is skipped when setting up an AFT in CU*BASE with one of these accounts. See a link to this skipped screen below. When members set up AFTs in online banking, they cannot set delinquency rules. For this reas  More...

For an additional level of security or to fulfill complex password requirements, members may add special characters to their passwords. They may also add special characters to their security question answers. Some members may even use the feature that allows them to create their own security question, and they may elect to include special characters in that as well (for example a question mark). Allowed special characters are listed below. Some characters have special significance to certain   More...

Keywords are not case sensitive. For example, you can type either help or HELP or even Help and you'll get the same result. BAL Reponses to BAL include the available balance on three savings accounts/and or checking accounts. Member Text: BAL Text Response: xxxxxxxxxxxxxxx:$-9,999,999.99, xxxxxxxxxxxxxxx:$-9,999,999.99, xxxxxxxxxxxxxxx:$-9,999,999.99. Reply HELP for help. Msg Data Rates May Apply. If multiple memberships are enrolled with the same phone, the response will ask you to specif  More...

The Social Security Administration uses several company IDs for its ACH transactions. Previously two recommendations were made to handle the changing Company IDs, namely to create records for all possible Company IDs with duplicate distribution records or to transfer the distributions with the Automated Funds Transfers (AFT) system. With the 16.10 release a process was implemented that will no longer require either of these complicated solutions. Going forward only one Company ID will need to   More...

Truth-In-Savings requires certain disclosures on periodic statements. One of the disclosures required on dividend-bearing accounts is the “annual percentage yield earned (APYE)”. The APYE is an annualized rate that reflects the relationship between the amount of dividends actually paid to the member’s account during the period and the average daily balance in the account for that period. *Note - this calculation uses the member’s average daily balance for the period,   More...

There are several steps in removing a member's Social Security number: 1) Run a global search to see what types of relationship codes the SSN has with your credit union. 2) The first relationship codes you will want to review are the 'CB' or 'JI' which mean the non-member is a co-borrower and/or joint owner on the account. They need to be removed first. To remove them, launch Tool #3 Open/Maintian Memberships/Accounts, choose Update member information then Joint owners an  More...

The first step is to make sure your credit union has filled out the three required forms: Sign Up Form, Electronic Payment Service Agreement, and Fed ACH Participation Agreement. There is also a non-disclosure agreement to sign to receive a copy of Magic-Wrighter's SSAE-16 audit results. Once the Client Service and Education team has received the forms from your credit union, they will send the form to our third party processor, Magic-Wrighter. Magic-Wrighter will submit a confirmation with  More...

To update a signature line in CU*BASE, you’ll use the Tool #497 Member Connect Marketing Tools . (You will need a file name to move forward, so it can be helpful to have a test file created in your QUERYxx library for situations like this.) NOTE: For Member Reach clients, Xtend has previously created a file ‘MBRRTEST’ that will allow you to access the Message Maintenance screen. Select Online Banking and/or email message from the first window and then use Enter. On the Mem  More...

The FRB produces six sets of files each business day on weekdays, Monday through Friday, except for Federal Holidays. CU*Answers posts the files as follows: CU*Answers receives the first and sixth set of files overnight and posts them by 8:30 AM ET. As this posting is a combined posting, two Receive reports and one Posting report are produced. CU*Answers receives the second set of files by noon and posts by 1:00 PM ET. Same-day credits must be posted with this file. CU*Answers receives the thir  More...

The system will advance the next payment due date depending on the payments made during the “payment period” window, which runs from due date to due date (which is not always calendar month). Once the next payment period begins, any payments made will count towards the payment amount due until it is fully satisfied, at which point the due date will advance to the next payment period. Payments may still be made during the current payment period; however, any overpayments will be c  More...

The CU*BASE Budget tools are not intended to project your entire balance sheet. While some software products do that, that was never our intent. Our purpose in modeling select assets and liabilities is to create a projection to be used to calculate the income and expense for the budget. It results in a few simple things: You can create reports to present how you see member balances growing in the future. You can create reports to present the actual member balance in comparison to your project  More...