Go into your member's account through Inquiry or Phone Operator. Use F14-Name/Address to access the address maintenance screen. On the Misc Info tab, update the member's e-mail address in the appropriate field. This change can also be made using Tool #15 Update Membership Information (shortcut: umbr). eStatement

You are referring to this announcement released by FinCEN in May. We currently have a project sheet (#45201) to comply with these required changes. NOTE: The deadlines refer to when FinCEN will begin being able to receive the new data, not the date when the new data must be sent. We continue to track this project with FinCEN and will alert clients when changes have been made that will affect their day-to-day activities.

The system will automatically generate an email any time an member's password is reset using the tools in CU*BASE (such as Tool #14 Member Personal Banker ) or in online banking by the member. This message is sent automatically to the email address already on file for the member. This is a security feature that is intended to warn members if someone else initiates a password change on their accounts without their knowledge. The content of the email reads as follows: If changed by a member in  More...

Previously, credit unions used Code 38 for “Return to Maker”, but this code is no longer available in the system. This change was initiated by a Reg CC change in 2018. Now, if you are presented with a situation where you need to return a check to another institution, it is recommended that you use one of these codes to clarify the reason for the check return. Some codes allow you to make the change in CU*BASE. Others require that you contact your Check Item Processor. Read below for   More...

There are several steps in removing a member's Social Security number: 1) Run a global search to see what types of relationship codes the SSN has with your credit union. 2) The first relationship codes you will want to review are the 'CB' or 'JI' which mean the non-member is a co-borrower and/or joint owner on the account. They need to be removed first. To remove them, launch Tool #3 Open/Maintian Memberships/Accounts, choose Update member information then Joint owners an  More...

The General Printer ID that is specified in Tool #326 CU Hardware Configuration does not control where screenshots are printed. The screen shot configuration needs to be changed on the virtual workstation device. Contact the network help desk for assistance. There should be 3 sessions per workstation (G0, G1, and G2). The screen shot printer can be modified here.

Click the My Preferences button (a star) in the upper-right corner of the CU*BASE home page and choose from one of the available Color themes. Use Enter when done to save. Themes are tied to your CU*BASE employee ID, so you will see that theme even if you log into CU*BASE from a different workstation.

The key thing to remember here is that when someone makes an email address change in online banking or CU*BASE, we send an email notification of this change to both the old and the new email address as a security precaution. Therefore, it may not be enough to simply look for accounts that have the email address of the member attached. The best method of attack to solve this type of question is to use Tool #100 CU*BASE Report Builder (Query). Query the appropriate month's maintenance fil  More...

If the configuration has a rate of 0.000, Audio Banking will not read any message for that rate, even if one was originally recorded. For example, say you have requested a message to be recorded for item #9 on the configuration, but then you forget to go in and actually enter the rate into your configuration, or you accidentally delete the rate later. That recording will never be read to the member. Once you go in and enter a rate in position 9, then message #9 will be read along with that ra  More...

Members can update personal information on the Personal Information page. As a security measure, credit unions can elect that these changes require their review before changes are accepted and changed in the system. This approval setup is activated on the Update Credit Union Online Banking Settings page accessed via Tool # 569: Online/Mobile Text Banking VMS Config and then Online/Mobile Web Online Banking. On this screen, the credit union can select to either have the changes reviewed or re  More...

To change a membership from individual to organizational (or vice versa): Launch Tool #3 Open/Maintain Memberships/Accts” Enter the account base and click Update Membership/Account Info Check the Membership information flag (if you also need to do joint owner maintenance, you can check that flag now as well), then press Enter or click Go to proceed Click Unlock Fields Click Chg to Orgn or Chg to Indv Click the lookup button next to the Designation field and choose the appropriate designat  More...

Tool #569 Online/Mobile/Text Banking VMS Config > Online Banking Password and Security Settings includes a setting labeled Expire stale passwords after xxx days of non-use . This means if a member does not log in within that period of time, they must answer all of their security questions in order to reactivate or change their password, before they can log in. The maximum allowed is 90 days, so a value 6 or 12 months is not currently allowed. Remember that this process expires the passwo  More...

There’s a chance that the email they received was forwarded by another member’s email account to theirs. To determine if it was forwarded to that member by another email address, the email headers can be analyzed to determine the route it took. Ask the Network Services help desk or your IT specialist for assistance examining email header information.

Yes, although for obvious reasons it is a special tool that should be carefully controlled and used only by authorized users in special situations. The most common use is immediately after a data conversion, where new clients just moving to the CU*BASE platform need to perform some routine cleanup of truncated names or stray special characters on street addresses on the data that was converted from their previous core processor. On occasion, a CU that has been on the system a while wants to go  More...

When building a loan category or changing the general ledger number in an existing loan category the sysem requires that the G/L account number be built in Tool # 383 GL Account Control Configuration first. This will ensure the accrual of interest during end-of-day processing. Contact a client service representative for help with this tool.

Ever wondered just how many times members really do call up and ask that their online banking password be reset? Might seem like some members call every other day, but until now there wasn’t really an easy way to tell. The new PIN/Password Change History tool was designed to answer that question quickly and easily, whether for one member or for all members as a trend. When accessed via Tool #14 Member Personal Banker , you will see just a single member’s history, which should be hel  More...

Use Tool #860 Print Variable Rate Config Report and use Enter to print the report. On this report you can verify floors and ceilings and effective dates of these changes. An example of the report is available on the help topic linked to below. Look in the PENDING section for what rate they are changing to and when the change will occur.

Access to personal information and other settings are now available by clicking the new profile button in the upper-right corner of the screen. These are the features included here: Message Center eAlert Subscriptions Personal Information (address, phone, email) Contact Preferences Change Username Change Password Change Security Questions Login History Password Change History

Membership Designation codes can be updated using Tool #15 Update Membership Information (you will need to use F11-Unlock Fields to allow a change to that field).

Use Tool #918 Update Trans Desc IRA/HSA Post Codes. After entering the account number and suffix for the IRA account, you'll see a list of transactions for that account. Simply highlight the item and click the IRA/HSA Code option. The IRA Posting Type Update screen will appear showing details about the transaction and the processing code that was originally used. To change the code, click the lookup button next to the New IRA process field and choose an appropriate code from the po  More...

When a Client Access print session is not configured correctly and is launched, the user name is already there and cannot be changed. This is caused by having the wrong connection options selected when configuring the session. To correct this, go into Start -> Programs -> IBM AS/400 Client Access -> Operations Navigator, right click the wescprod.cubase.org connection and choose properties. In the properties window, select connection and change the option for login to Prompt Every Time   More...

Your credit union should require that the member use a restrictive endorsement – ‘For mobile deposit to [your credit union name]’. It is also recommended that your member agreements shift liability for a second presentment of an item to the depositor if the depositor fails to use the required language. Also, check with your RDC Process Vendor; eDOC Innovations, for example, offers a service that will scan for restrictive endorsements on all RDC items on submission.

Changing the member's name via Tool #15 Update Membership Information does not automatically change the member's name in the PLASTICS file. You would need to access Tool #11 ATM Debit Card Maintenance , highlight the member's card, and select Reorder Card/PIN. You will then be able to change the member's name and order them a debit card with the correct name information. Before selecting Add/Update, make sure you only select Order Card, and deselect the Order PIN and   More...

Between February 23, 2021 and June 11, 2021, credit unions who have links from their website to our business online banking product (formerly known as It's My Biz 247 ), will need to adjust the URL on those links to BizLink 247 as follows (the parts in red are the only parts that need to be changed, and ### represents your online banking ID): OLD ADDRESS NEW ADDRESS https://www. itsmybiz247 .com/###/Authentication/Username https://www. bizlink247 .com/###/Authentication/Username https://p  More...

Not manually, no, but if a member has any type of Statement Mail Group (field name NOMAIL ) code other than 0 and the member signs into It's Me 247 to enroll in e-statements, the online system makes the change immediately. This writes out to the CUFMNT file with employee ID 96=Nomail code field updated /changed.