If you press the SHIFT key five times in rapid succession it will ask if you would like to turn on StickyKeys. If you click OK, it will turn on StickyKeys. StickyKeys is an accessibility option in Windows that allows for someone to use the CTRL, ALT or SHIFT keys one key at a time without having to hold the keys down. To turn StickyKeys off: Click on the Start button Click Control Panel If you see “Pick a category” with 10 categories below, click Accessibility Options, and then c  More...

As a result of a January 2018 Windows 10 update, you will need to join your Windows 10 iSweep to your domain. This will be handled internally for Network Services Managed Clients, however, non-managed clients will need to have Network Services work with their IT staff/third party IT company to setup a new local account on the machine in order to join this unit to your domain and complete the additional steps. Configuring Group Policy and Active Directory Active Directory Configuration Open Act  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

This is how to check your current network settings. The procedure varies depending on your computer's Operating System: For Windows 2000 or XP Right -click on the Start button and select Explore . Scroll to the bottom of the left hand pane, then right -click on My Network Places and select Properties . A new window will pop up and you should see Local Area Connection in the window. Right -click that connection and, again, select Properties . A separate window should pop up and you shoul  More...

GUAPPLE is short for GOLD Update Appliance. The GUAPPLE is a stand-alone network appliance that takes the place of the GOLD-Master update server PC. It is designed to seamlessly handle all of your GOLD software update retrieval tasks. No effort is required to retrieve software updates when using a GUAPPLE device. It will acquire GOLD update files automatically as well as custom loan screen updates, doing away with manually downloading and extracting software update files. One GUAPPLE unit  More...

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CU*BASE in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 10, you’ll need to install Telnet. Visit https://social.technet.microsoft.com/wiki/conten  More...

While it is possible that an issue someone runs into on a website is an issue with the web server or a programming issue with the site, it is very important to rule out any browser or workstation incompatibilities first. If the website is not being opened in a supported browser, for instance, it can cause errors that would otherwise not exist. So what are some standard troubleshooting steps than can be taken? Are you using the latest version of your browser? Just like any other piece of software  More...

These message indicators appear on the CU*BASE loan insurance premium posting report (TCUNAS2 / TCUNAS3) and the Debt Protection Fee posting/exception reports (TCUNAD2 / TCUNAD3). By looking at the reports, you can tell if a premium / DP fee posted or not based on the exception. LOAN INSURANCE MESSAGES ADD SIGN There is joint coverage on this loan. There is either no 'additional signer' record, or the birth date for the additional signer is missing or invalid. JT TO SG There is joint cov  More...

This is an issue when trying to access the IBM iAccess Key Database that holds all the certificate information necessary for using SSL. Make sure you've run the updates.cubase.org for enabling encryption as well as the everyone permission to ensure all users can access the key database file. Next you will want to access the IBM iAccess for Windows either through Control Panel or the Start Menu and go under the Secure Sockets option. Select 'Use default key database' if not already se  More...

To update a signature line in CU*BASE, you’ll use the Tool #497 Member Connect Marketing Tools . (You will need a file name to move forward, so it can be helpful to have a test file created in your QUERYxx library for situations like this.) NOTE: For Member Reach clients, Xtend has previously created a file ‘MBRRTEST’ that will allow you to access the Message Maintenance screen. Select Online Banking and/or email message from the first window and then use Enter. On the Mem  More...

To ping a network device, you will need to open a command prompt: In Windows 7, click on the Start button and type cmd (without the quotes) then press Enter. In Windows 10, type the following into the Windows Search box: cmd , and when the result appears, right click and select Run as Administrator Once the command prompt is open, you will need to type the word ping followed by the name or IP address of the network device you want to ping. To test connectivity to the High Availabil  More...

After enabling session encryption, GOLD may present a Warning T02 error message and not launch. Here is a screenshot of the error: If you encounter this error message, there may be an issue with your workstations local certificate store. We have identified a few possible causes. Typically, your workstation has several expired certificates in the store that are causing conflicts; or your workstation does not have the correct GoDaddy intermediate certificates. Follow the steps below to corre  More...

There is a credit union-level on/off flag where you can disable auto-security as an option for ALL of your employees. To access this, launch Tool #327 Employee Security and use the CU Options button. If auto-security is enabled, anyone can choose to activate it if they wish, either manually by clicking the button at the bottom of the home page, or via their Preferences. As a compromise, if you have some employees who share workstations and therefore need to be able to enter an ID as they acc  More...

Unwanted Topaz Systems Driver files may be located in a few different locations depending upon which version of windows you have. You will likely need to be logged on as a local administrator to remove them. They can exist on any workstation running ProDOC regardless of whether or not a signature pad is attached. For Windows 7 or 8 The current version in use should be located here: C:\Windows\SigPlus\SigPlus.ocx and should not be removed. Before you begin make sure this is version 4.4.0.22 o  More...

There are several ways to obtain this data. To see the total number of active online banking members, use Tool #856 Tiered Svcs Monthly Comparison to display active user counts for any monthly period. (HINT: Click the Goal 4 button to display this data.) This can be done even if your credit union does not use Tiered Services for any other purpose. To print a report of usage statistics, use Tool #141 ARU/Online Banking Stats Dashboard To see online banking usage stats for a particular m  More...

Here are seven things to review if you are trying to research why a loan did not report to the credit bureau. Look to see if the loan is flagged not to report to the credit bureau: Access Tool #20 Update Account Information (shortcut: acct) for the account and click the Credit Reporting Info button. The Report to credit bureau flag must be checked. Look at the Credit Report History located in Loan Account Inquiry via the Delinquency window (F23 or click the lookup button next to the Deli  More...

If a member cannot view their check, the research team needs the following information: Credit Union Questions What is your credit union name? Have multiple members reported that they cannot view checks? Are these members having the same experience when viewing their check? (See Member Questions. ) Has the check appeared on the Check Exceptions Report? (TNDET) Was this check cleared at the teller line? (Sometimes this is referred to as a counter-killed check.) Are you able to retrieve a chec  More...

The previous tools used for uploading and downloading to and from CU*BASE will be retired when your credit union recieves the 20.07 CU*BASE software release. For online and Site-Four credit unions, that date is Sunday, July 12. Self-processing credit unions will receive the release the following Sunday, July 19. To replace the two tools, a new tool was introduced in November 2018, Tool #1375 Data Transfers (Upload or Download) . Following the release, this tool will be the default data transfer  More...

The system will advance the next payment due date depending on the payments made during the “payment period” window, which runs from due date to due date (which is not always calendar month). Once the next payment period begins, any payments made will count towards the payment amount due until it is fully satisfied, at which point the due date will advance to the next payment period. Payments may still be made during the current payment period; however, any overpayments will be c  More...

Both of these terms refer to types of Secondary Names records that can be linked to individual savings, checking, certificate and IRA accounts. There are actually three types of links, tracked via records in the SECNAMES (Secondary Names) database table: Joint owners (type J ) Beneficiaries (type B ) Miscellaneous owners (type M - added with the 18.10 release) All are simply links from an account to another membership (MASTER) or non-member (MSNONMBR) record. Labels used when displaying t  More...

Members can update personal information on the Personal Information page. As a security measure, credit unions can elect that these changes require their review before changes are accepted and changed in the system. This approval setup is activated on the Update Credit Union Online Banking Settings page accessed via Tool # 569: Online/Mobile Text Banking VMS Config and then Online/Mobile Web Online Banking. On this screen, the credit union can select to either have the changes reviewed or re  More...

You can add an entry to the new membership fraud block list as an individual or organization. This fraud block list is different than other service denial lists in that it allows you to enter a name on the list without a Social Security Number. See more about the rules for adding a name to the new membership list in the other topic linked to this Answer Book item. This fraud block list is designed as a supplement to the “Deny Membership” check box available on the non-member recor  More...

Make sure that drivers for the printer are loaded on the PC on which you are building the session. Test the drivers by printing a windows test page unless you are using a thermal receipt printer. DO NOT SEND WINDOWS TEST PAGES TO THERMAL RECEIPT PRINTERS! Once you know the printer is set up correctly, then perform the following steps: 1) Go to Start>Programs>IBM Client Access Express>Emulator>Start or Configure Session. 2) Select Configure. 3) Set the System Name to WESCPROD.  More...