These files should automatically be placed into the correct spots to ensure that Iaccess continues to work without any problems. If you want to verify that you have received this file you can follow these few steps: Open My computer Navigate to c:\users\public\documents\ibm\client access\ Verify the current file size of “cwbssldf.kdb” If this file size is 30kb then everything worked correctly and you don’t have to do anything else. If this file size is different follow steps   More...

In order to take a loss on an overdrawn base share (000) account (closing the entire membership), do the following: First, using Tool #492 Member Account Adjustment (Full) , make an adjustment to zero out the balance for the amount of the loss and assign it to the general ledger account associated with this type of loss, per your credit union policies and procedures. Then close the membership using Tool #22 Close Memberships/Accounts . Per your credit union policies and procedures, you may   More...

The IRS, which makes changes to tax form layouts almost every year, recently added this new informational box to form 1098 to report the balance on a mortgage account as of January 1 of that same tax year. Each year on January 1 we capture the loan balance on all loan accounts in a special file, and then when tax forms are created at the end of the year we can use that figure. Therefore, for loans that were opened in a prior tax year, this balance is usually easy for members to understand.   More...

Using CBX to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and collecti  More...

There is a credit union-level on/off flag where you can disable auto-security as an option for ALL of your employees. To access this, launch Tool #327 Employee Security and use the CU Options button. If auto-security is enabled, anyone can choose to activate it if they wish, either manually by clicking the button at the bottom of the home page, or via their Preferences. As a compromise, if you have some employees who share workstations and therefore need to be able to enter an ID as they acc  More...

In a nutshell, you will set up a Membership Designation Code for Representative Payee, with the label for primary name set to Beneficiary and the label for the joint owner name set to Rep Payee. Then the procedure is to open the membership in the beneficiary's name and SSN, then put the representative payee's SSN as the joint owner (type J secondary name link). TIPS: Remember that in CU*BASE the words joint owner simply are used to describe a particular record type in the Se  More...

The most important thing to understand is when the bill will be received, not how it will be paid. Payment methods are determined by the relationship between Fiserv and the biller, and are subject to change. When scheduling a payment, the system automatically pre-fills the earliest payment date the biller can receive the payment. The date can be altered to a future date, but not an earlier date. Once a payment begins processing, you will be able to view the payment method in the history. If the   More...

Remember that once the emails are sent by CU*BASE, it becomes a function of various email service providers to deliver the emails to members. Because of the way our system can send a batch of email messages to a large group of members at the same time, there may be some providers that interpret these email messages as “spam” (junk email) messages, especially if you have a large number of members who use the same provider (such as Gmail). If you hear from members that your emails ar  More...

CBX does have several different places where product descriptions can be configured, each used for different purposes. It's common for the descriptions to be entered the same into each configuration, but there are reasons why they are sometimes slightly different. For example, if you use the same range of account suffixes across several of your checking account products, your account suffix description might be something general like Checking whereas the description entered into the Divi  More...

CBX has a tool that displays application statistics in a handy dashboard format. Tool #472 Loan Queue Activity Tracking allows you to choose a date range and branch to filter the information, with additional filters such as Underwriter Code, Delivery Channel, Interviewer ID, Loan Category, Product Code, Dealer #, and Business Unit, if you wish. You can also use this dashboard to analyze the data you've selected in your filters, as well as export to a PDF or Excel format. This dashboard can a  More...

Yes, the Statement Mail Groups feature lets you configure up to 9 codes that can be attached to a member's account. The codes specify whether statements should be printed and archived (the standard method) or just archived only. This is used in situations such as for members with written-off loans or bankruptcy situations where the member shouldn't receive a statement, or even if you want to avoid printing statements for your own staff. Archived statements are available through CU*SPY  More...

Use of the Force Monthly Statement' option on the member's MASTER record will allow for member to receive a monthly statement instead of the quarterly/annual statement they may qualify for based on your overall statement configuration settings. Remember that this is intended to be used only in rare occasions where there are exceptions to your rules. If you find that your staff is setting this flag on frequently, you might need to (a) revisit your general configuration settings or (b)   More...

When a device first connects to the iSeries, a virtual device is created - consider it a placeholder for that workstation or printer. Only one device can exist for each ID, which is why only one person can sign into a printer at a time. Throughout the virtual devices lifecycle, there are several different statuses that device can be in. Read below for some details! Workstations VARY ON PENDING - this is the default status of the virtual device. This status means the device is ready and wai  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CBX The table has been used before (has at least 1 row of data in it). For the purpose of the exampl  More...

No, our CSRs will not reset the 2-character CU*BASE Employee IDs for your staff. This must be done by an internal CU security officer. Use Tool #762 Reset Employee ID Password . (This can also be done via Tool #327 CU*BASE Employee Security using the Reset PW option.) It is important that credit unions insure proper training to their employees regarding the expiration of their CU*BASE Employee ID password. We deliver a warning message of expiration 7 business days prior to the staff member.   More...

IMPORTANT NOTE: When It’s Me 247 was updated in 2021, the “See” option shown on here was made unavailable. There are two major points to consider when thinking about allowing members to see information beyond the account to which they are actually logged in. Both extend beyond online banking to consider a financial institution’s role and responsibility in protecting member private data via all access channels, from the teller line to a back office employee answering   More...

These symbols print when the printer doesn't know what graphic or font to use for the logo, signature, or MICR line. There are a few possible causes: Is this a new printer? If this is a new printer, the first thing to consider is whether the other printers at the credit union use Check Secure devices. Check Secure devices are no longer sold and are not compatible with new printer hardware. To transition from Check Secure devices to the new software based check printing methods, contact CU  More...

The best way to gather this information is via Report Builder (Query), This report will require building a string query to identify memberships who have received unemployment deposits in a given month. Please Note : Using Tool #100 to build queries typically requires training. The information written below assumes the reader already has entry-level understanding of database terminology and query skills. Building the query is one part of a total strategy: Find and list the members receiving unemp  More...

When you use the filter buttons on the File Maintenance Inquiry dashboard (Tool #159: Audit File Maintenance Inquiry (CUFMNT)), indicators note which programs, fields/columns, and files/tables AuditLink has flagged as “critical” for auditing teams to monitor on a daily basis. You can quickly sort by that indicator and select only those items for a quick scan of maintenance that directly affects member accounts. Below is a listing of these critical items. Columns/Fields Field Why   More...

Trust accounts can be set up as either individual or organizational depending on the legal nature of the trust. Following are recommendations for handling situations when a member wants to set up a membership where the primary member and the first joint owner are, in essence, the same person. This happens most often for trust accounts. Currently in CU*BASE there are two ways to handle trusts: For trusts that use a person’s SSN (where you do not have a separate TIN for the trust), set up th  More...

If you pull credit reports using the CU*BASE online credit bureau access system, credit report data is stored online and can therefore be mined for opportunities. There are a couple of ways you can find this information: Use Tool #976 Where Your Members Borrow This tool pulls trade line data from stored credit report files, showing other financial institutions with whom your members do business. This tool lets you make a direct comparison between your credit union and a competitive FI. F  More...

The FRB produces six sets of files each business day on weekdays, Monday through Friday, except for Federal Holidays. CU*Answers posts the files as follows: CU*Answers receives the first and sixth set of files overnight and posts them by 8:30 AM ET. As this posting is a combined posting, two Receive reports and one Posting report are produced. CU*Answers receives the second set of files by noon and posts by 1:00 PM ET. Same-day credits must be posted with this file. CU*Answers receives the thir  More...

If you or your member notice an account is not being updated (or the additional signer on a loan) you should first try to find out if the loan/additional signer was included in the file sent over to the bureau. You can do this for the most recent reporting cycle by running Tool #658 Print Loan Info Sent to Credit Bureau . If the member loan/additional signer information (defined by METRO 2 as the J1 segment or J2 Segment) is present in that file you need to look further into the following types  More...

As we transition from CU*BASE GOLD to CBX, we are shifting from an application that runs directly on a workstation to a more modern, browser-based solution. Previously, CU*BASE GOLD relied on command-line arguments and local temporary files to interact with multiple applications. This approach is not sustainable for the future, as web browsers lack the capability to execute command-line requests and require called applications to be installed and registered on the system. To address this limitat  More...