Tool number 1014: 1099/1098 Tax Information Report is the tool you can use to find this information. If you select the summary tab you will get your overall numbers. This report also displays information from your credit union's tax file, to be used when verifying tax information for reporting to members and the IRS. Three reports are available: one for 1099-INT information, one for 1099-R information, and another for 1098 information. You can even print the report for a single Social Secur  More...

As a result of a January 2018 Windows 10 update, you will need to join your Windows 10 iSweep to your domain. This will be handled internally for Network Services Managed Clients, however, non-managed clients will need to have Network Services work with their IT staff/third party IT company to setup a new local account on the machine in order to join this unit to your domain and complete the additional steps. Configuring Group Policy and Active Directory Active Directory Configuration Open Act  More...

The IRS, which makes changes to tax form layouts almost every year, recently added this new informational box to form 1098 to report the balance on a mortgage account as of January 1 of that same tax year. Each year on January 1 we capture the loan balance on all loan accounts in a special file, and then when tax forms are created at the end of the year we can use that figure. Therefore, for loans that were opened in a prior tax year, this balance is usually easy for members to understand.   More...

If you press the SHIFT key five times in rapid succession it will ask if you would like to turn on StickyKeys. If you click OK, it will turn on StickyKeys. StickyKeys is an accessibility option in Windows that allows for someone to use the CTRL, ALT or SHIFT keys one key at a time without having to hold the keys down. To turn StickyKeys off: Click on the Start button Click Control Panel If you see “Pick a category” with 10 categories below, click Accessibility Options, and then c  More...

Yes. You will want to ensure that no other users are performing any general ledger processing when these steps are taken! The first step is to use Tool #202 Chart of Accounts/Budget Groups Maint and update the Current process month and year to 12/YY (December of the closing year). In addition you will want to flag the line item Current Processing year/month is equal to period 13 Y/E. Then create and post your entry using Tool #61 Create/Post GL Journal Entries. Remember to also post the ne  More...

The most likely reason is that the member did not have any activity for the month that would trigger a statement, based on the CU's configuration. Most credit unions have their statement configuration set up to print a monthly statement only if the member has a checking account, and only if there is activity on that account, saving postage costs on months when there is no activity. You can verify this by viewing his Share Draft Transaction Inquiry in Phone Operator, then compare that to yo  More...

When using Tool #990 Work With Accounts Payable Vendors to verify your 1099 vendor information, take special care that you are entering the correct 1099 box number from the 2020 1099-MISC form instructions; especially paying attention to box numbers that changed, including 7, 9, 10, 12, and 14. As an example, if your vendor reports Gross Proceeds Paid to an Attorney , that was previously box 14 and is now reported in box 10, so in order to report this correctly you must change the 14 to 10 on t  More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the changes ma  More...

Yes, if data is received late or needs to be recreated due to a missed deadline, your credit union may incur a fee of $100 or more. For deadlines refer to the Year-end Processing Guide, which is sent to your credit union every fall.

In this particular member's situation there was no activity in either October or November that triggered a statement. The credit union's quarterly (and year-end) statements are configured to produce a statement for every member, regardless of activity level, but monthly statements are more restrictive in an attempt to save postage costs, and not every member gets a statement every month. NOTE: CU*BASE statements have a considerable number of configuration options that allow credit unio  More...

Remember that this new value only started being calculated with the implementation of the 22.05 release in May of 2022. However, if you had been tracking this manually via a spreadsheet since write-off, use these steps: Launch Tool #1030 Write-off/Chart-off Loan History Maint Enter the written-off loan account number Calculate the sum of whatever amount appears in the Int accrued since write-off field now plus your tracked figure, and enter that total into the field Click Update (F5) to   More...

Prior to the 16.10 release, the SSA began using multiple Company IDs, and it was recommended that credit unions consider using Automated Funds Transfers (AFTs) to handle distributions. Beginning with the 16.10 release a new cross-reference system will be implemented that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” With the chang  More...

Yes. There is a technique for reviewing and manually adjusting branch allocation calculations for projected asset and liability balances. See the Budgeting with CU*BASE booklet for instructions. NOTE: The classical budgeting tools also contain a “Close a branch” function which zeros out monthly figures from your budget starting with a month you specify. But this does not affect projections for asset and liability balances used in the modeling tools.

We strongly recommend that you regularly test access to the HA server to ensure that you can connect to CU*BASE in the event of an HA rollover test or actual disaster. We recommend that you perform this test monthly and whenever you make a change to your network. To perform this test, follow the instructions below. 1. Ensure that Telnet is installed on your workstation. If you are running Windows 10, you’ll need to install Telnet. Visit https://social.technet.microsoft.com/wiki/conten  More...

Here are some ideas of things to remind members: If an online banking username was set up, the account number can no longer be used to log into the account. You may need to clear the username to allow the member to create a new one. Refer to the directions below. Your member number is the main account number that identifies your relationship with the credit union. Your account number can be up to nine digits long. Be sure that the number you are entering does not include the share or loan accou  More...

General Requirements CU*BASE GOLD, CBX, and the associated cuasterisk.com software suite ( Station Control , ProDOC, SearchLink, etc.) require that the following networks be routed to the cuasterisk.com network (typically via a CU*Answers Cisco router): For all CU*Answers privately routed networks below, all ports/services should be allowed outbound from any device accessing CU*BASE or CBX. Required for standard Production connectivity: 63.150.21.96/27 63.236.240.16/28   More...

To ping a network device, you will need to open a command prompt: In Windows 7, click on the Start button and type cmd (without the quotes) then press Enter. In Windows 10, type the following into the Windows Search box: cmd , and when the result appears, right click and select Run as Administrator Once the command prompt is open, you will need to type the word ping followed by the name or IP address of the network device you want to ping. To test connectivity to the High Availabil  More...

Download the Software Note: Our network requirements have been updated and can be found here . Please verify with your IT vendor that these changes have been put into place before attempting to download Station Control. You can download CBX from this link . Site-Four clients please use this link . Instructions for Manual Install of CBX Station Control Run the downloaded CBX Install Suite Prod CBX1.exe installer. This will require administrative privileges on the workstation. 1. On the CBX In  More...

With the 16.10 release we have developed a new cross-reference system that will automatically funnel all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” Refer to the linked to Answer Book items for more information about this feature. At implementation of the release two reports were placed in your credit union’s HOLDxx OUTQ. The first, CNV40003, lists all  More...

Previously, credit unions used Code 38 for “Return to Maker”, but this code is no longer available in the system. This change was initiated by a Reg CC change in 2018. Now, if you are presented with a situation where you need to return a check to another institution, it is recommended that you use one of these codes to clarify the reason for the check return. Some codes allow you to make the change in CU*BASE. Others require that you contact your Check Item Processor. Read below for   More...

Do not use these instructions if you are performing one of the standard uploads such as to DMPIMPORT, FCBUSINESS, FCPERSON, IMPEMAIL, etc. Instead, look for your appropriate .FDFX companion file in C:\cubase\cubase\resources Instructions below are relevant for projects where you are working to upload data to a custom table destination that meets the following criteria: The table already exists in CU*BASE The table has been used before (has at least 1 row of data in it). For the purpose of the ex  More...

Here are seven things to review if you are trying to research why a loan did not report to the credit bureau. Look to see if the loan is flagged not to report to the credit bureau: Access Tool #20 Update Account Information (shortcut: acct) for the account and click the Credit Reporting Info button. The Report to credit bureau flag must be checked. Look at the Credit Report History located in Loan Account Inquiry via the Delinquency window (F23 or click the lookup button next to the Deli  More...

With the 16.10 release a new cross-reference system was implemented that automatically funnels all incoming company IDs from the Social Security Administration and treat them as if they came from one, consistent company ID we’re referring to as the “Primary ID.” In cases where the Depositor ID is the same, for example a husband and wife, these ACH transactions will be handled by the same master ACH distribution record under the Depositor ID since duplicate Depositor IDs are no  More...

GUAPPLE is short for GOLD Update Appliance. The GUAPPLE is a stand-alone network appliance that takes the place of the GOLD-Master update server PC. It is designed to seamlessly handle all of your GOLD software update retrieval tasks. No effort is required to retrieve software updates when using a GUAPPLE device. It will acquire GOLD update files automatically as well as custom loan screen updates, doing away with manually downloading and extracting software update files. One GUAPPLE unit  More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...